Calling; Dialling With Number Keys; End Call; Set Volume - Siemens Be inspired M55 User Manual

18
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Enter number (always
with area code, if neces-
sary with international di-
alling code).
§Clear§
the last digit, a long press
clears the entire phone
number.
A
Press the Call key. The dis-
played phone number is
dialled.

End call

B
Press End key briefly. The
call is ended. Press this
key even if the person on
the other end of the line
has hung up first.

Set volume

E
Use the control key (top)
to start adjusting the vol-
ume (only possible during
conversation).
G
Set volume and confirm
with §OK§.
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
A short press clears

Calling

Redial previous numbers

To redial the phone number last
called:
A
To redial other numbers that were
dialled previously:
A
G
A
Additional information
Save phone number in Address-
book/Phonebook .....................p. 29, p. 32
§Options§
§Hold§.................................................p. 20
y menu§
§Divert§
§Handsfr.§
Microphone off ..................................p. 22
Voice dialling .....................................p. 35
Auto key lock .....................................p. 71
Phone number transmission off/on
(Hide ID)............................................p. 71
International dialling codes..............p. 110
Phone number memo......................p. 113
Control codes (DTMF).....................p. 109
Press Call key twice.
Press the Call key once.
Pick out the required
phone number from the
list, then press ...
... to dial.
Call lists............................p. 37
Call menu.........................p. 22
Set divert .............................p. 71
Handsfree .......................p. 20