Please read these instructions carefully before operating this unit,
and retain this manual for future reference
Manual
Camera
Precautions
•
Do not install the camera in extreme temperature conditions. Only use
the camera under conditions where temperatures are within -10℃ ~
+50℃. Be especially careful about ventilation in high temperatures.
•
Do not drop the camera or subject it to physical shocks. This can cause
malfunctions to occur.
•
Do not install the camera under unstable lighting conditions. Severe
lighting change or flicker can cause the camera to work improperly.
•
Do not disassemble the camera. There are no user serviceable parts
inside it.
•
Do not expose the camera to rain or moisture. If it gets wet, wipe it dry
immediately. Liquids can contain minerals that corrode electrical parts.
Features
•
1/3" Colour CCD
•
Internal Micro Dome Camera
•
Ø57mm Dome Cover
•
620TVL - High Resolution
•
Min Illumination 0.03Lux
•
Digital Noise Reduction (DNR)
•
DC12V Only
•
Black or White Housing Options
PIN PITCH:1.25㎜
HOUSING:51021-03
Power and Video Connection
MOLEX
PIN PITCH:1.25㎜
HOUSING:51021-03
MOLEX
CABLE DIAMETER : ¢4.5
12VDC : RED
35mm
BNC : YELLOW
35mm
650mm
Gift Box
Installation
Screws
CABLE DIAMETER : ¢4.5
12VDC : RED
BNC : YELLOW
650mm
Troubleshooting
Problem
No video on the monitor
•
Check camera and monitor power.
screen
•
Check the power polarity.
•
Check the video cable connection.
Colour rolling
•
This can occur if the camera is exposed to a
strong light source
•
If there is a strong light present, change the
position of the camera.
The On-Screen image
•
Check if the lens/bubble is dirty. If it is, clean with
is dim
a soft line free cloth.
•
Check the monitor contrast and brightness.
Black bars roll up or down
•
Make sure the power adapter is at least 500mA
the screen, or there is
•
Make sure there are no ground loops
video noise
•
Noise could be caused by a poor connection
Dimensions
What To Do?