FujiFilm FinePix A400 Owner's Manual page 83

PRINT DPOF
PRINTING
CANCEL
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
A Check that "PRINTING" is not displayed on the
camera's screen.
B Turn the camera off. Unplug the USB cable (mini-
B).
DPOF setting can be specified for images on internal
memory.
• In PictBridge function, images photographed on other
than a camera may not be printed.
• Do not connect to a PC when the USB MODE setting is
set to ® PICTBRIDGE. See p.113 if you connect to
a PC by mistake.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or an xD-Picture Card that was
formatted on FinePix A400 / FinePix A500.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
A400 / FinePix A500 may not be printed.
83