FujiFilm FinePix A400 Owner's Manual page 113

Matters Problems
PC does not
Connecting to PC recognize the
camera.
Connecting to Cannot print with
printer PictBridge.
Z Others
Matters Problems
Nothing happens
when pressing the
buttons on the
camera.
Camera operation
etc.
The camera no
longer works
correctly.
Possible causes
The USB cable (mini-B) is not correctly
connected to the PC or camera.
< PICTBRIDGE is selected in
L USB MODE in the SET-UP menu.
@ DSC is selected in L USB MODE
in the SET-UP menu.
Possible causes
Camera malfunction may be caused
temporarily.
The batteries have run out.
Camera malfunction may be caused
temporarily.
Solutions
Set up the camera, and connect the USB
cable (mini-B) correctly.
Perform the below steps to cancel the
setting before selecting @ DSC.
• Windows
A The "New Hardware Found" wizard or
"Scanner and Camera" wizard appears.
If the wizard does not appear, proceed
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the PC.
• Macintosh
A The window for locating the driver appears.
If the window does not appear, proceed
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the Macintosh.
Select < PICTBRIDGE.
Solutions
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
Load new or fully charged batteries.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.
Page
90
90
79
Page
15,
16,
78,
101
15,
17, 99
15,
16,
78,
101
113