FujiFilm FinePix A400 Owner's Manual page 107

Warning Displayed
\ NO IMAGE
An attempt was made to transfer images from the
xD-Picture card or internal memory that memory
Y NO IMAGE
was empty.
` CAN NOT TRIM
An attempt was made to trim a 0.3M image.
• An attempt was made to trim an image shot using
CAN NOT TRIM a camera other than FinePix A400 / FinePix A500.
• The image is damaged.
Prints were specified for 1000 or more frames in the
DPOF frame settings.
DPOF FILE ERROR
CAN NOT SET DPOF An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
r CAN NOT SET DPOF
The camera is not connected to a PC or printer.
COMMUNICATION
ERROR
Displayed for PictBridge.
PRINTER ERROR
Displayed for PictBridge.
PRINTER ERROR
RESUME?
Explanation Remedy
It is impossible to copy.
The image cannot be trimmed.
The image cannot be trimmed.
The maximum number of frames for which prints can
be specified on the same xD-Picture Card is 999.
Copy the images for which you want to order prints
onto another xD-Picture Card and then specify the
DPOF settings.
DPOF printing cannot be used with this image
format.
• Check that the USB cable (mini-B) is connected
correctly.
• Check that your printer is turned on.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
107
Continued