Preparation; Where To Place The System - Sharp LC-30AA1M Operation Manual

Preparation

Where to place the System

"System" means the Display and AVC System. First select the location where to place the System.
1
Selecting the location of the System
• Select a place with no direct sunlight and good ventilation.
• The Display and the AVC System are connected by the system cable.
(See page 7 for details.)
2
Setting the System in place
Handling the Display
CAUTION
• The LC-37AA1M Display weighs about 25 kg and the LC-
30AA1M Display weighs about 20 kg. Move it with two or more
people.
• Do not remove the stand from the Display unless using an
optional bracket to mount it.
• Keep enough space above and behind the Display.
Handling the AVC System
CAUTION
• Do not put a VCR or other device on the AVC System.
• Keep enough space above and on the sides of the AVC System.
• Do not block the ventilation openings on the top and left side,
and the exhaust fan on the right side.
• Do not spread a thick cloth beneath the AVC System, or cover it
with one, as this can cause overheating and result in malfunction.
6
LC-37AA1M(E)-a
Display
10 cm
or more
6
If you want to keep a longer distance between the
Display and AVC System, please purchase the optional
system cable AN-07SC1 (about 7 meters). (See page 76.)
IMPORTANT
• You cannot use external speakers when you are using the optional
system cable (AN-07SC1).
System cable
Keep enough space
5 cm or more
5 cm or more
on both sides
03.11.6, 9:46 AM
AVC System
CAUTION
Adjust the screen with both
hands. Put one hand on the
Display and tilt the screen
while steadying the stand
with your other hand.
You can adjust the screen
vertically up to 4 degrees
forward or 6 degrees back-
ward, or rotate 10 degrees
horizontally.
There is an exhaust fan
on the right side.