Supplies; Types And Sizes Of Copy Paper; Supply Part Numbers - Sharp AL-1611 Operation Manual

SUPPLIES

Types and sizes of copy paper

Size
Paper tray A5* to A3
Bypass tray Ordinary paper:
A6 to A3
Envelopes:
International DL
(110 x 220 mm)
International C5
(162 x 229 mm)
Commercial 10
(104.78 x 241.3 mm)
* A5 copy paper cannot be used in the lower paper tray of AL-1622.
** For paper weighing from 105 to 128 g/m
can be fed through the bypass tray.
*** Do not use envelopes that have metal clasps, plastic snappers, string
closures, windows, linings, self-adhesive patches or synthetic materials.
These will cause physical damage to the copier.
G
For best results, use only paper recommended by SHARP.
G
Special papers except envelopes must be fed one sheet at a time through
the bypass tray. Up to 10 envelopes can be set at one time.

Supply part numbers

When ordering supplies, please use the correct part numbers as listed below.
Be sure to use only genuine SHARP parts and supplies.
Supply list
Supply
TD cartridge
Drum cartridge
* Based on copying onto A4 size paper at 5% toned area
(The life of the TD cartridge which has been included in the copier at the factory is
approximately 4,500 sheets.)
Weight
56 to 80 g/m
56 to 128 g/m
(Ordinary paper)
2 , A4 is the maximum size that
Part number Usable life
AL-161TD Approx. 9,000 sheets*
AL-160DR Approx. 30,000 sheets
Capacity (80 g/m
paper)
2
250 sheets
2
** 100 sheets
2 Special paper
Transparency film,
labels, envelopes***
59