Preset; On-Screen Display Language Selection; Presetting The Channels (Auto) - Sharp Aquos LC-22GA3M Operation Manual

Preset

On-Screen Display Language Selection

MENU on the LCD TV set can also be used to select the
language.
Upper control panel
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
PRESET mode screen.
A U T O ( B / G )
V H F 1
4 8 . 2 5 M H Z
2
Press MENU (PRESET-1) twice to display the
LANGUAGE select mode screen.
• Press MENU (PRESET-1) again to change the
PRESET mode as shown below.
AUTO MANUAL
NOTE
• Instead of pressing MENU for more than 2 seconds, you can set
the language by selecting "LANGUAGE" in "SETUP" in the Menu
screen. (See page 21.)
E N G L I S H
3
Press CH ( )/( ) to select the language you wish to
display.
4
Press TV/VIDEO to return to the normal screen.
12
LC-22GA3MX_E_P12-15.p65
3 1, 2 4
LANGUAGE NORMAL SCREEN
12

Presetting the Channels (AUTO)

Automatically tunes in and presets receivable TV stations.
Make sure the antenna cable is properly connected.
Upper control panel
2
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
Sound System
AUTO ( B/G )
VHF 1
48.25MHZ
2
Press VOL (–)/(+) (PRESET-2) on the upper part of
the LCD TV set. All the TV stations in your area that
can be received by the LCD TV set are automatically
preset.
3
The screen shows whatever is on channel 1 when full
auto channel preset is finished.
NOTE
• When starting PRESET after setting "SOUND SYSTEM" with MENU
on the remote control, "SOUND SYSTEM" for all channels are
stored into memory.
• Unused channels are automatically skipped.
• The Preset mode is only available in the TV mode.
• Instead of pressing MENU for more than 2 seconds, you can set
the channel by selecting "CH SETUP" in "SETUP" in the Menu
screen. (See page 14.)
04.8.25, 7:56 PM
1
1
P A L
B / G