Table of Contents
Advertisement
Operating additional equipment
Video playback
There are several ways to see the picture and hear the sound of the VCR,
DVD player or camcorder on your TV:
1.
You can use the Euro AV sockets on the TV set and on the VCR. This
is the best way to get a good picture and sound quality. Use the EXT 4
input on the left of the TV for camcoders and digital cameras.
When playing from a video recorder with AV Link (or a comparable
system from another manufacturer), the picture from the VCR is
shown at the current programme place.
When playing back from another video recorder, camcorder or digital
camera, select the AV socket to which the video is connected with AV
selection (button
) or with the station table (OK).
Video recorders transmit a switching voltage during playback which
the TV can evaluate (can be activated in the connection wizard or in
the "TV menu" – "Connections" – "Miscellaneous" - "Allow switching
voltage" to "yes"). Then the picture of the video recorder is shown at
the current programme place.
2.
Use the antenna connection between the VCR and the TV. The sound
is only transmitted in mono. Select the fi rst menu item, e.g. VIDEO, in
the AV selection.
Calling an AV programme in the AV selection list
Call AV selection
External sources
VIDEO
EXT1
EXT2
EXT3
EXT4
EXT5
PC IN
Select input source with
(or VIDEO if the video recorder has been
connected via the antenna socket) and confi rm with OK.
Now you will see the playback from the connected AV unit.
Notes:
If channel 0 (Video) is called and a switching voltage is applied to
•
EXT1 / EXT 2, the TV set switches automatically to this input.
At EXT4 you may either connect a Y/C or CVBS video source (no
•
simultaneous operation).
Calling AV stations with the station table
Call the station table with the OK button in TV mode.
In the numeric sorting you will always fi nd the input source at the top of
the list without station numbers.
Timer recording with video or DVD recorder
You can programme timer recordings on the TV set. Programming can
be done with the EPG (not with DVB-T in UK), analogue teletext or manu-
ally.
Call the " AVL timer list" menu.
TIMER
AVL timer list
30.06. 19:00-19:15 ZDF Heute
press the red button for "New recording".
Recording wizard
Via EPG
Via teletext (VPS)
Select whether you want to programme the recording by EPG, (ana-
logue) teletext or manually.
Note: Copy protectet Pay-TV broadcasts are not available at the AV
sockets.
When you have connected a recorder which has AV Link or a comparable
system from a different manufacturer, the timer data of analogue terres-
trial stations are transmitted from the TV to the recorder. The recording
quality SQ or EQ is transmitted for DVD recorders addtionally to station,
date and time. The recording is then controlled by the recorder and the
recorder tuner is used for reception of the station. The recording data are
not saved in the timer list of the TV set. You will only fi nd the timer data
in the recorder.
If you want to record from digital stations, the TV tuner is used and the
recorder is controlled by the TV set. Then the programme is locked dur-
ing the timer recording. You can switch over to another station (analogue
terrestrial) if you have a digital tuner (from which you are recording) and
analogue terrestrial reception.
If you have connected a Sharp video recorder with AV Link and you are
using the timer programming of the TV, the TV receiver is always used
for terrestrial stations as well. The TV controls the recording.
You have to set the recorder to the AV input to which the TV set is con-
nected.
The programme is locked during the timer recording. Switching to other
stations is not possible.
AV Link must be switched on on the recorder. Read the operating
instructions of your recorder.
Use only Euro AV cables, which are completely shielded, otherwise AV
Link will not work.
Thu 30.06./13:51
Manual
31
Hide quick links:
Advertisement
Table of Contents
