Preparation; Power Connection; Batteries For Remote Control - Sharp LC-20M4E Operation Manual

Preparation

Power Connection

Plug into AC outlet.
AC cord
Notes:
Use a commercially available AC plug adapter, if necessary, depending on the design of the wall.
Always turn the main power switch of the LCD monitor to OFF when connecting the AC adapter.
Always unplug the AC adapter from the product and power outlet when not being used for a long period of time.

Batteries for Remote Control

If the remote control fails to operate monitor functions, replace the batteries in the remote control.
1
Open the battery
cover.
Slide the cover while
pressing down.
Caution!
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not used for an extended period of time, remove batteries from the remote
control.
4
Household power outlet
AC adapter
2
Insert batteries (two R-03
(UM/SUM-4) batteries,
supplied with product).
Place batteries with their
terminals corresponding to
the (+) and (–) indications
in the battery compartment.
Connect to DC input
terminal of the product.
DC input terminal
(DC 13 V)
3
Close the battery
cover.