Adjusting The Sleep Timer Settings - Sharp LC-20M4E Operation Manual

Adjusting the SLEEP TIMER Settings

VOL
ON/OFF
MUTE
(+)/( )
MENU
AV INPUT
MENU
SELECT
VOL VOL
SELECT
(])/([)
SELECT
LCD MONITOR
1
Press MENU to display the MENU
screen.
2
Press SELECT (])/([) to move the
cursor to FEATURE, and then press
VOL (+)/(–) to display the FEATURE
screen.
3
Press SELECT (])/([) to move the
cursor to SLEEP TIMER, and then
press VOL (+)/(–) to set SLEEP TIMER
(in minutes).
The setting can be specified in
increments of 30 minutes and in a
range between 30 and 120 minutes.
The setting is turned off when --- is
displayed.
4
Press MENU again to exit.
Note:
If the monitor's power is turned off and then
turned back on again after the SLEEP TIMER
has been set, the setting will be cancelled.
Adjustment (Continued)
MENU
PICTURE
FEATURE
LANGUAGE
SELECT: ENTER: –VOL+
FEATURE
BRIGHTNESS
UPSIDE
RIGHT/LEFT
BLUE BACK
AV1
AV2 IN/OUT
SLEEP TIMER
SELECT: ADJUST: –VOL+
EXIT: MENU
[BRIGHT ]
[NORMAL]
[NORMAL]
[OFF ]
[NORMAL]
[IN ]
[– – – REMAIN]
EXIT: MENU
15