Where To Place The System - Sharp Aquos LC-32G4U Operation Manual

Preparation

Where to place the System

"System" means the Display and AVC System. First select the location where to place the System.
1
Selecting the location of the System
• Select a place with no direct sunlight and good ventilation.
• The Display and the AVC System are connected by the system cable.
(See page 11 for details.)
2
Setting the System in place
Handling the Display
CAUTION
• Do not remove the stand and speaker from the Display unless
using an optional bracket to mount it.
• Keep enough space above and behind the Display.
• The Display weighs about 52.9 lbs/24 kg (LC-37G4U) and 48.5
lbs/22 kg (LC-32G4U). Move it with two or more people.
• When you move the Display, hold the portion of the Display, not
the speaker.
Handling the AVC System
CAUTION
• Do not put a VCR or other device on the AVC System.
• Keep enough space above and on the sides of the AVC System.
• Do not block the ventilation openings on the top and left side, and
the exhaust fan on the right side.
• Do not spread a thick cloth beneath the AVC System, or cover it
with one, as this can cause overheating and result in malfunction.
4 inches
(10 cm)
or more
10
Display
Keep enough space
System cable
Adjust the screen with both
hands. Put one hand on the
Display and tilt the screen
while steadying the stand
with your other hand.
You can adjust the screen
vertically up to 2 degrees
forward or 6 degrees back-
ward, or rotate 10 degrees
horizontally.
2 inches
(5 cm) or more
2 inches
(5 cm) or
more
AVC System
CAUTION
There is an
exhaust fan on
the right side.