Sound Adjustment; Dolby Virtual; Dolby Virtual; Treble - Sharp Aquos LC-32G4U Operation Manual

Basic adjustment settings

Sound adjustment

You can adjust the sound quality to your preference
with the following settings.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Audio".
MENU
[ Audio ]
Audio

Treble

[0]

Bass

[0]

Balance

[0]

Dolby Virtual

Reset
3
Press a/b to select a specific adjustment
item.
4
Press c/d to adjust the item to your desired
position.
Selected item
cbutton
Treble
For weaker treble
Bass
For weaker bass
Decrease audio from
Balance
the right speaker
NOTE
• Audio menu is grayed out when Output Select is set to
"Variable" or when headphones are in use.
• Balance and Audio Quality Control are grayed out when
Dolby Virtual is set to "On".
• For resetting all adjustment items to factory preset values,
press a/b to select "Reset", press ENTER, press c/d
to select "Yes", and then press ENTER.
Power Control
–15 +15
–15 +15
R
L
[Off]
d button
For stronger treble
For stronger bass
Decrease audio from
the left speaker

Dolby virtual

You can enjoy the SURROUND 2ch stereo with Dolby
Pro Logic II technology.
VIRTUAL DOLBY SURROUND is a technology certified
by Dolby Laboratories that creates a virtualized
surround sound experience from two speakers using
Dolby Pro Logic or Dolby Pro Logic II.
VIRTUAL DOLBY SURROUND retains all the original
multichannel audio information and provides the
listener with the sensation of being surrounded by
additional speakers.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Audio".
3
Press a/b to select "Dolby Virtual", and
then press ENTER.
[ Audio ... Dolby Virtual ]
MENU
Audio
Treble [0]
Bass [0]
Balance [0]

Dolby Virtual

Reset
4
Press c/d to select "On", and then press
ENTER.
NOTE
• You can choose Dolby Virtual by pressing
the remote control unit. See page 27 for Dolby Virtual.
• Audio menu is grayed out when Output Select is set to
"Variable" or when headphones are in use.
• Balance and Audio Quality Control are grayed out when
Dolby Virtual is set to "On".
• For some discs, setup may be required on your DVD. In
this case, please refer to the operation manual of your
DVD player.
• You may not get the Dolby Virtual Surround effect if you
adjust "Treble" or "Bass" setting.
Power Control
–15 +15
–15 +15
R
L
[Off]
Virtual on
41