Basic Operation
Turning On and Off the Main Power
MAIN POWER
Power/Standby indicator
Switching the TV/VIDEO (AV1/AV2/AVS/TV) Mode
TV/
VIDEO
LC-20A2E-GBpp13-39
| Press MAIN POWER, located on
the front side of the main unit. The
power indicator instantaneously
changes from red to green and
the main unit is turned on.
Note:
I The display time of the on-screen
indicators can be selected with "On-
screen time" for the "On-screen
display" menu item in the TV menu
(see page 37).
| To turn off the main power, press
MAIN POWER again. The power
indicator instantaneously changes
from green to red and the main
unit is turned off.
1
Turn on the power of the
connected video equipment.
2
Press TV/VIDEO to select the
applicable input source. The
screen displays AV1, AV2, AVS or
TV mode each time TV/VIDEO is
pressed.
Note:
I About the video modes
• AV1: Select this when viewing the
signals from the video
equipment connected to the
AV-IN1 terminal.
• AV2: Select this when viewing the
signals from the video
equipment connected to the
AV-IN2 terminals using the
VIDEO terminal for video
input.
• AVS: Select this when viewing the
signals from the video
equipment connected to the
AV-IN2 terminals using the
S-VIDEO terminal for video
input. (If both the S-VIDEO
and VIDEO terminals are
connected, the S-VIDEO
terminal takes priority.)
13
[ On-screen display
1 S 0 8
AV1 mode
1 9 9 A V 1
AV2 mode
1 9 8 A V 2
AVS mode
1 9 7 A V S
TV mode
1 S 0 8
00.12.12, 12:59 PM
13