Replacing The Speaker Net - Sharp LC-20A2E Operation Manual

Part Names of Main Unit (Continued)
I Replacement
(1) With your hand on the rear of the speaker, grasp both sides
of the speaker net with your fingers at the top, centre, then
the bottom, and slowly pull the speaker net toward you.
I Attachment (left and right)
(1) Check the (L) and (R) marks on the rear of the speaker net.
(2) Insert the six pins on the rear of the speaker net into the
holes in the speaker.
(3) With your hand on the rear of the speaker, press gently
against the net at the top, centre, and then bottom with the
palm of your hand.
I Notes on handling the speaker net
• For regular care and cleaning, wipe away dust and dirty
using a duster or soft brush.
• Do not let your nails or other sharp object scratch the
speaker net.
• Do not wipe with a house-cloth or use a vacuum cleaner.
• Do not rip the speaker net by touching it with your hand.
Note:
I The speakers should only be removed by a SHARP service person.
Notes on Lifting
Note:
I Do not reach inside the gap between the installation stand and the unit with your hands. If the stand and unit are
inclined, your hands may be caught, resulting in an injury, etc.
10
LC-20A2E-GBpp01-12

Replacing the Speaker Net

Do not grasp the front
cover to carry the product.
10 00.12.12, 12:55 PM