250-SHEET PAPER FEED UNIT (AR-D16)
The paper feed unit provide the convenience of increased paper capacity for the unit
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit and
changing the paper size are same as for
the paper tray in the unit. See "LOADING
THE PAPER TRAY" (p.8).
Selecting the tray
Press the tray select (
Each time you press the tray select (
indicated by the paper feed location indicator changes in
the following order: paper tray 1 or paper tray 2.
Using the paper feed unit with the printer function
(when the AL-12PK is installed)
When the printer/scanner expansion kit is installed on the unit, the AR-D16 can also
be used with the printer function. To use the AR-D16 with the printer function, follow
these steps to adjust the settings in the printer driver.
The printer driver cannot be set for use with the AR-D16 when opened
from the application.
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
On Windows 95/98/Me/NT 4.0/2000, select "Setting" and click "Printers".
3
Click the "SHARP AR-123E" printer driver icon and from the
"File" menu select "Properties".
On Windows 95/98/Me, click the "SHARP AR-123E" printer driver icon,
select "Properties" from the "File" menu, and then click the "Setup" tab.
36
) key.
) key, the location
Lower side cover
Tray