Appendix A Specifications; Sata Hard Disk Drive Models - NEC Express5800/120Rg-1 User Manual

Appendix A
Specifications

SATA HARD DISK DRIVE MODELS

Item
Type
CPU
Clock/Cache
Standard
Maximum
Chipset
Memory Minimum
Maximum
Expansion unit
Expansion times
Memory module
Error check
Graphics (VRAM)
Auxiliary Floppy disk (option)
input device
Hard disk (standard)
Hard disk (maximum) 750GB (250GB × 3)
DVD-ROM (standard) ATAPI interface × 1 (Load on tray type, x24 speed)
Hard disk Interface
drive bay
Slots
RAID
Hot-swap
Additional PCI EXPRESS (x8)
slot
PCI-X (64-bit/100
MHz)
LAN interface
External Keyboard/mouse
interface
USB
Serial
Network
Display
SCSI
Power supply
Fan
Cabinet design
External dimensions
Weight (Max.)
NEC Express5800/120Rg-1
1241F 1327F
Intel Xeon processor
 
1.60GHz/4MB 2.00GHz/
4MB
1
2
Intel 5000P (1066/1333 MHz)
2GB (1GB×2)
48GB (The standard DIMM must be replaced.)
2 DIMMs (512MB/1GB/2GB/4GB)
6 times
SDRAM DIMM (Low Profile DDR2-533 Buffered Type)
ECC
VRAM: 16MB
3.5-inch drive × 1 (USB)
None
SATA2/300
3
RoMB: RAID0/RAID1
Option: RAID0/RAID1/RAID5
Supported if the RAID system is configured.
1 slot (low-profile)
1 slot (full-height)
1000Base-T/100Base-TX/10Base-T (2 ports)
100Base-TX/10Base-T (1 port for management port)
MINI DIN 6-pin connector (1 port)
4-pin (4 ports, 2 for front panel, 2 for rear panel)
DB-9 (2 ports, 1 for front panel, 1 for rear panel)
RJ-45 (2 ports)
MINI D-sub 15-pin (1 port)
Option
1 (no redundancy)
8 + 7 redundant fans
Rack-mount type (1U)
425 (width) × 43 (height) × 718* (depth) mm
16 kg (19 kg)
N8100-
1328F
2.33GHz/4MB 3.00GHz/4MB
1242F