T Image Quality; U Dynamic Range; P Film Simulation; Nd Filter - FujiFilm FinePix X100 Owner's Manual

Using the Menus: Shooting Mode

T IMAGE QUALITY

T
IMAGE QUALITY
Choose a fi le format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or
FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios
for higher-quality JPEG images, while NORMAL and NORMAL+RAW user higher JPEG compression ratios to increase the num-
ber of images that can be stored.
U

U DYNAMIC RANGE

DYNAMIC RANGE
Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to
reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended
for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn
leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may
appear in pictures taken at higher values.
R If AUTO is selected, shutter speed and aperture will be displayed when the shutter button is pressed halfway.
R R B B 200% is available at sensitivities of ISO 400 and above, C
P

P FILM SIMULATION

FILM SIMULATION
Simulate the eff ects of diff erent types of fi lm (P 54).
t ND FILTER t

ND FILTER

Turn the ND fi lter on or off (P 57).
d WB SHIFT d

WB SHIFT

Press the command dial up or down to fi ne-tune white balance on the selected color axis (Red–Cyan or
Blue–Yellow) by +9 to –9 in increments of one. Press MENU/OK to select.
f COLOR f

COLOR

Adjust color density.
70
C 400% at sensitivities of ISO 800 and above.
( ( defaults to defaults to FINE) FINE)
defaults to A A ) )
( ( defaults to
( ( defaults to defaults to ) )
( ( defaults to defaults to OFF) OFF)
WB SHIFT
Red Blue
R B
0 0
Cyan
Cy Ye
Yellow
SET CANCEL
( ( defaults to defaults to MID) MID)