Attaching Adapter Rings And Lens Hoods - FujiFilm FinePix X100 Owner's Manual

Lens hoods Lens hoods LH-X100: This aluminum lens hood, exclusively for use with the X100, comes with an AR-
X100 adapter ring made of the same material. The adapter ring is required when attach-
ing the hood.
Adapter rings Adapter rings AR-X100: An aluminum adapter ring exclusively for use with the X100. It is used when
attaching the LH-X100 lens hood or φ49 mm fi lters available from third-party suppliers.

Attaching Adapter Rings and Lens Hoods

Attaching Adapter Rings and Lens Hoods
1
Remove the front ring.
R R If you have trouble re- If you have trouble re-
moving the front ring, moving the front ring,
grip the entire ring and grip the entire ring and
rotate it as shown. rotate it as shown.
2
Attach the adapter ring
as shown, with the pro-
jections facing out.
3
Align the male and fe-
male threads as shown
and place the lens hood
on the adapter ring. Ro-
tate the lens hood as
shown.
R Keep the front ring and lens cap in a safe place
when not in use.
R Attach the adapter ring before attaching fi lters from
third-party suppliers.
Optional Accessories
101