Frymaster MSDU Operators & Service Manual
Frymaster MSDU Operators & Service Manual

Frymaster MSDU Operators & Service Manual

Vegetable oil disposal unit

Advertisement

Quick Links

VEGETABLE OIL DISPOSAL UNIT (MSDU)
MANUFACTURED BY
P.O. BOX 51000
SHREVEPORT, LOUISIANA
PHONE 1-318-865-1711
1-800-24 FRYER
This equipment chapter is to be inserted in the Fryer
section of the Equipment Manual.
1
INTRODUCTION ............................................................................ 1
1.1 Service Information and Parts Ordering ......................................... 1
1.2 Installation, Operating and Service Personnel................................ 1
1.3 Definitions....................................................................................... 1
1.4 Shipping Damage Claim Procedure ............................................... 2
1.6 Warranty Statement........................................................................ 2
2.
ASSEMBLY AND OPERATION ..................................................... 2
2.1 Equipment Description ................................................................... 2
2.2 Equipment Assembly...................................................................... 3
2.3 Equipment Operation...................................................................... 3
2.4 Cleaning ......................................................................................... 5
3.
SERVICE PROCEDURES ............................................................. 5
3.1 General........................................................................................... 5
3.2 Replacing Worn or Damaged O-Rings ........................................... 5
4.
PARTS LIST................................................................................... 8
Frymaster L.L.C., 8700 Line Avenue 71106, 5489 Campus Drive 71129
PRINTED IN THE UNITED STATES
www.frymaster.com
OPERATOR & SERVICE MANUAL
71135-1000
P.O. Box 51000, Shreveport, Louisiana 71135-1000
PHONE 318-865-1711
SERVICE HOTLINE 1-800-24-FRYER
E-mail:
service@frymaster.com
FAX 318-219-7135
*8195236*
SEPTEMBER 2005

Advertisement

Table of Contents
loading

Summary of Contents for Frymaster MSDU

  • Page 1: Table Of Contents

    3.2 Replacing Worn or Damaged O-Rings ... 5 3.3 Replacing Worn Pump Vanes and/or Pump Shaft Seal... 5 PARTS LIST... 8 Frymaster L.L.C., 8700 Line Avenue 71106, 5489 Campus Drive 71129 P.O. Box 51000, Shreveport, Louisiana 71135-1000 PRINTED IN THE UNITED STATES www.frymaster.com...
  • Page 2 SERVICE CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER.
  • Page 3: Introduction

    Service information may be obtained by contacting your local FASC. Information may also be obtained by calling the Frymaster Technical Service Department at 1-800-24-FRYER (1-800-243- 7237) or 1-318-865-1711 or e-mail: service@frymaster.com. In order to assist you as quickly as possible, the FASC or Service Department representative requires certain information about your equipment.
  • Page 4: Shipping Damage Claim Procedure

    The Vegetable Oil Disposal Unit (MSDU) is designed for the safe transportation of used cooking oil from the kitchen to a disposal container. The MSDU holds to 50 pounds/23 kg of cooking oil. The unit consists of a tank to receive waste oil from a fryer and a heavy-duty manual pump for...
  • Page 5: Equipment Assembly

    The height of the discharge pipe allows pumping directly into a standard 55-gallon drum. With the cover open, the top of the MSDU tank is 9¾ inches (248 mm) above the floor, permitting it to be positioned directly beneath the drains of McDonald’s fryers. (NOTE: The tanks on MSDUs built before January 2004 are 11½...
  • Page 6 Turn the pump handle clockwise. The pump should start discharging oil after a few turns. Continue turning the handle until the MSDU reservoir is empty. NOTE: The pump is NOT self-priming. If it has not been used for several days, it may have lost its prime and may need to be re-primed in accordance with Step 3 of Section 2.2.
  • Page 7: Cleaning

    Clean the crumb screen with a solution of detergent and water. Clean the exterior surfaces of the MSDU with a soft cloth and a solution of detergent and water. It is not necessary to clean the interior of the reservoir, but if desired it may be wiped down with clean paper towels to remove excess residual oil.
  • Page 8 3. Grasp the pump shaft and carefully pull the rotor assembly straight out of the pump housing far enough to expose the vanes. IMPORTANT: The vanes are spring-loaded. Use one hand to hold the vanes while pulling the rotor assembly the rest of the way out of the housing. Carefully release the vanes and discard the worn vanes, springs, and rods.
  • Page 9 THIS PAGE INTENTIONALLY LEFT BLANK.
  • Page 10: Parts List

    PARTS LIST Note: See page 6 for MSDU pump assembly components.
  • Page 11 809-1001 Screw, ¼-20 x ½” Slotted Head 802-0227 Label, Fill Line 823-4580SP Tank and Axle Assembly 826-2103 MSDU50 Retrofit Kit for MSDU’s manufactured prior to Jan. 2004 810-0783 Cotter Pin, Wheel 810-1112 Wheel, 7-inch x 1½-inch 815-0661 Adhesive, 3M 1300L...
  • Page 12 Frymaster, L.L.C., 8700 Line Avenue, PO Box 51000, Shreveport, Louisiana 71135-1000 Shipping Address: 8700 Line Avenue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-318-688-2200 FAX (Tech Support) 1-318-219-7135 819-5236 SERVICE HOTLINE PRINTED IN THE UNITED STATES SEPTEMBER 2005 1-800-551-8633...

Table of Contents