Lenovo ThinkServer 1043 Installation And User Manual page 61

6. Connect the mini SAS signal cable to ports 0-3 on the RAID controller.
Note: Use the 400 mm (15.75 inches) mini SAS signal cable.
Figure 40. Connecting the mini SAS signal cable to the RAID controller
1
Ports 0-3
2
Ports 4-7 (reserved for use)
7. Install the RAID controller into an appropriate PCI card slot on the riser card assembly. Then, install
the screw to secure the RAID controller in place.
Figure 41. Installing the RAID controller into the PCI card slot on the riser card
8. Install the riser card with the RAID controller into an appropriate PCI card slot on the system board.
.
Chapter 5 Installing, removing, or replacing hardware
51