Samsung Q45c User Manual page 69

Setting the Sound to Digital Sound
Output on the Computer
Since the sound of the computer is set to Digital Output by
default when purchasing the computer, additional settings
are not required. You can confirm the setting as follows.
1
Double-click the Volume Control (
notification area of the Taskbar.
2
In the Master Volume window, make sure the SPDIF
mute box is unchecked.
Selecting Digital Output in the DVD Player
Program
Since the sound setting is set to Digital Output by default,
you do not additionally need to configure it for digital
output. You can confirm your settings as follows.
1
) in the If the CyberLink PowerDVD program is not installed,
2
Launch CyberLink PowerDVD and click Configure.
3
Change the Speaker Environment value to Use S/
4
Insert and play a DVD title. You can listen to S/PDIF
Note
8
install the program using the system software media
(or additional CD depending on the computer model).
PDIF in the Audio tab.
sound.
For some DVD titles, you can listen to more realistic
sound if you additionally select S/PDIF from the Setup
menu of the DVD title.