Setting Up Anynet; Scanning And Switching Between Anynet + Devices - Samsung LN40F81BD Owner's Instructions Manual

Setting up anynet +

The following settings help set the Anynet + functions.
to use the anynet + function, anynet + (hDmI-CEC) must be set to on
. Press the mEnu button.
Press the ▲ or ▼ button to select "Setup", then press the EntEr button.
Press the EntEr button to select "Anynet + (HDMI-CEC)", then press the EntEr
.
button.
. Press the ▲ or ▼ button to select "Anynet+ (HDMI-CEC)", then press the EntEr
button.
. Press the ▲ or ▼ button to select "On", then press the EntEr button.
The Anynet + (HDMI-CEC) function is enabled.
If you select Off, Anynet + (HDMI-CEC) is disabled.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet + related
operations are deactivated
Setting an anynet + Device to turn off automatically when the tV is turned off
. Press the ▲ or ▼ button to select auto turn off, then press the EntEr button.
. Press the ▲ or ▼ button to select "On", then press the EntEr button.
The "Auto Turn Off" function is enabled.
If you select "Off", the "Auto Turn Off" function is canceled.
Press the EXIt button to exit.
The active source on the TV remote must be set to TV to use the Anynet + function.
If you set the "Anynet+ (HDMI-CEC)" to On, the Device List menu appears when you press the "Anynet+" button on the
remote control.
If you set "Auto Turn Off" to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.

Scanning and Switching between anynet + Devices

Press the anynet + button.
.
Press the EntEr button to select "Device List".
Anynet + devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for devices.
. Press the ▲ or ▼ button to select to a particular device and press the EntEr button.
It is switched to the selected device.
Only when you set "Anynet+ (HDMI-CEC)" to On in the "Setup" menu, the "Device List"
menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the PoWEr button, devices connected when the TV
is already on are not displayed in the device list.
Therefore press the red button to re-scan devices if necessary.
If you have selected external input mode by pressing the SourCE button, you cannot use the Anynet + function. Make sure to
switch to an Anynet + device by using the Anynet + button.
English - 
Blue Screen : Off
Melody : Medium
Anynet+ (HDMI-CEC)
Wall-Mount Adjustment
Parental Lock
Child Lock
Energy Saving : Off
AV Color System : Auto
SW Upgrade
Function Help : On
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) : ON
Off
Auto Turn Off :
On
Move Enter
Anynet+ (HDMI-CEC) Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off :
Off
On
Move Enter
TOOLS
Device List
Picture Size : 16:9
Picture Mode : Dynamic
Sound Mode : Custom
Sleep Timer : Off
Channel Add/Delete
Delete from Favorite
Auto Program
Move
►
Return
Return
Enter