Turning The Tv On And Off; Plug & Play Feature - Samsung LN40F81BD Owner's Instructions Manual

operation

turning the tV on and off

Press the PoWEr button on the remote control.
You can also use the PoWEr
Plug & Play feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently:
1. Press the PoWEr button on the remote control.
The message "Executes the Plug & Play function when you set the TV at first or
reset it. Sets channels, clock and other functions." is displayed.
Press the EntEr button.
The message "Select Home Mode when installing this TV at home." is
automatically displayed.
2. Press the ◄ or ► button to select "Shop" or "Home", then
press the EntEr button.
The message "Select the antennas to memorize" is displayed.
We recommend setting the TV to "Home" mode for the best picture in your
home environment.
"Shop" mode is only intended for use in retail environments.
If the unit is accidentally set to "Shop" mode and you want to return to
"Home"(Dynamic) mode, press any Volume button and then hold down the
mEnu button for five seconds on the side panel of the TV.
3. Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the EntEr button to select "Start".
If the antenna is connected to ANT 1 IN (AIR), select "Air" and if it is connected
to ANT 2 IN (CABLE), select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the
"Air + Cable".
4. The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the EntEr button when channel memorization is complete.
The message "Set the Clock mode." is displayed.
To stop the search before it has finished, press the EntEr button with "Stop"
selected.
5. Press the EntEr button.
Press the ▲ or ▼ button to select "Auto", then Press the EntEr button.
The message "Select the time zone in which you live." is displayed.
If you select "Manual", "Set current date and time." is displayed. (See page 49)
button on the TV.
English - 
Plug & Play
Executes the Plug & Play function when you set the TV
at first or reset it. Sets channels, clock and other
functions.
OK
Enter
Plug & Play
Select Home Mode when installing this TV at home.
Shop Home
Move Enter
Plug & Play
Select the antennas to memorize
Air
Cable
Air+Cable
Move Enter
Plug & Play
Auto Program in Progress.
Digital Channels are added on the favorite
channel list.
Stop
Enter
Plug & Play
Auto Program is completed.
3 channels are memorized.
Air : 1 Cable : 2
OK
Enter
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Auto
Manual
Move Enter
Exit
Skip
MENU
Start
Start
Start
Skip
MENU
Cable 10
3%
Skip
MENU
Skip
MENU
Skip
MENU