Samsung SPH-A900 Service Manual page 26

Test Procedure
D. To finish the Test Mode, You should enter the command "0 0 2".
E. Enter to Test Mode [ 4 7 * 8 6 9 # 1 2 3 5 ]
F. "0 0 1" : Suspend.
G. "0 1 1" : Carrier_On.
H. "0 1 4" : CDATA.
I. "0 1 0" : PA_R1(0:LOW GAIN MODE, 1:HIGH GAIN MODE)
J. "0 1 9" : Adjust RF power level.
PCS
A. Enter to Test Mode [ 4 7 * 8 6 9 # 1 2 3 5 ]
B. "0 0 1" : Suspend.
C. The command "022" is mode and channel change
"3 0 6 0 0"
Channel number
Mode:PCS
Push the [enter] key to save.
D. To finish the Test Mode, You should enter the command "0 0 2".
E. Enter to Test Mode [ 4 7 * 8 6 9 # 1 2 3 5 ]
F. "0 0 1" : Suspend.
G. "0 1 1" : Carrier_On.
H. "0 1 4" : CDATA.
I. "0 1 0" : PA_R1(0:LOW GAIN MODE, 1:HIGH GAIN MODE)
J. "0 1 9" : Adjust RF power level.
6-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization