Channel Add/Delete; Sleep Timer - Samsung CS21Z30 Owner's Instructions Manual

Channel - Sort
This operation allows you to
TV
change the programme numbers
From
To
of stored channels.
Store
This operation may be necessary
after using auto store.
Move
 From : Channel number to be
changed.
 To : New channel number to be identified.
 Store : Confirmation the exchange of channel numbers.
Channel - Manual Store
You can store channels, including
TV
those received via cable networks. Programme
Colour System : AUTO
When storing channels manually,
Sound System : BG
you can choose:
Search
Store
– Whether or not to store each of
the channels found
Move
– The programme number of
each stored channel which you
wish to identify
 Programme (Programme number to be assigned to a
channel)
 Colour System : AUTO / PAL / SECAM / NTSC4.43 /
NTSC3.58
 Sound System : BG / DK / I / M
 Search (When you do not know the channel numbers)
The tuner scans the frequency range until the first channel
or the channel that you selected is received on the screen.
 Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel - Add/Delete
Sort You can exclude channels you
have chosen from the channels
: P 1
: P--
you scanned. When you scan
: ?
through the stored channels,
those you have chosen to skip are
not displayed. All of the channels
that you did not specifically
Adjust Return
choose to skip are displayed
during scanning.
Method:
ENTER : Select Added or Deleted
Channel - Fine Tune
Manual Store If the reception is clear, you do
: P 3 not have to fine-tune the channel,
►
as this is done automatically
►
during the search and store
: 46MHz
: ?
operation. If however the signal is
weak or distorted, you may have
to fine-tune the channel manually.
Adjust Return
Method:
◄/► : You can obtain a sharp and clear picture and good
sound quality.
▲/▼  ENTER : You can reset the setting.
MENU : You can memorise adjusted picture or sound.
Add/Delete
TV
▲ More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
▼ More
Move Enter Return
Fine Tune
P 1 0
Reset
Move Save
Adjust Return
English - 4
Setup - Time
TV
 Clock
Clock
You can set the television
On Timer - - : - - am Off
clock so that the current time
Off Timer - - : - - am Off
is displayed when pressing
the INFO button on the
remote control. You must also
set the time if you wish to use Move
the automatic on or off timers.
➢
When pressing the " I " button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
 On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛
You must set the clock first.
☛
Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
"On" mode and prevents overheating, which may occur if a
TV is on for too long.

Sleep Timer

You can select a time period of
between 30 and 180 minutes
after which the television
automatically switches to
standby mode.
You can select these options
simply by pressing the SLEEP
button on the remote control.
If the sleep timer is not yet set, Off is displayed. If it is already
set, the remaining time before which the television switches to
standby mode is displayed.
Time
- - : - - am
Enter Return
30 Min.