Selecting Heat Mode - Samsung AQV09NS* Series User Manual

Selecting Heat Mode

You can select Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
1
Press the (On/Off) button.
Result:  The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the mode you selected last.
 The indoor unit beeps.
2
Press the button on the remote control until
Result:  The indoor unit beeps each time you press the
 The air conditioner runs in Heat mode.
Note You can change modes at any time.
3
Press the button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:  Each time you press the
- The temperature adjusts by 1°C
- The indoor unit beeps
 If the room temperature reaches 5°C higher than the set
temperature, the air conditioner stops heating, but the fan
continues to operate.
 If the room temperature reaches 3°C lower than the set
temperature, the air conditioner starts heating again.
4
Press the button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
Low
Medium
High
Silence mode
Result:  Each time you press the
 For the first 3~5 minutes, the fan may not operate to prevent
cool air from flowing out of the indoor unit.
This helps to warm the air in your room sufficiently.
Note
Silence mode( ) makes the noise quieter during
operating the indoor unit in the Heat mode.
5
To control the airflow direction, refer to page 21.
FORTE_Inv_31717A_IB_E.indd 15
is displayed.
button.
button:
)
 
button, the indoor unit beeps.
15
E-
2010-1-28 11:38:10