Setting An Indoor Unit Address And Installation Option - Samsung NS***HHXEH User & Installation Manual

Setting an indoor unit address and installation option
Set the indoor unit address and installation option with remote controller option. Set the each option separately since
you cannot set the ADDRESS setting and indoor unit installation setting option at the same time.You need to set twice
when setting indoor unit address and installation option.
Setting an indoor unit address
In order to check and set the indoor unit Main/Group Address using the wired remote controller, hold
down the and
1 The menu will display .
Press the button and the menu will display .
2
Press the button.
The main address (decimal notation) and group address (hexa-
decimal notation) of currently set indoor unit will be displayed.
3
Press the
indoor unit Main/Group Address.
4 Press the button.
Wired remote controller sends data to an indoor unit.
5 Press the
You will move to the menu selection display.
• Press the
• Setting main/group address of an indoor unit is available only
with a master wired remote controller.
INV HSP MA DUCT_DB98-33882A.indd 29
buttons at the same time for 5 seconds.
buttons and the button to set the
button to exit.
button anytime during setup to exit without setting.
Menu No.
Checking the Indoor unit
Indoor unit RMC address
main address
Setting the
Indoor unit
main address
2011-5-31 18:54:44
29