Pioneer MEH-P9100R Installation Manual page 5

This Product
IP-BUS input
(Blue)
Speaker leads
: Front left +
White
White/black : Front left ≠
: Front right +
Gray
Gray/black : Front right ≠
: Rear left + or Not Used
Green
Green/black : Rear left ≠ or Not Used
: Rear right + or Subwoofer +
Violet
Violet/black : Rear right ≠ or Subwoofer ≠
RCA output
Refer to "Connecting to a sold
separately Power Amp".
Refer to "Connecting to a
Sold Separately Power Amp".
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
Blue/white (6*)
Blue/white
To system control terminal of
the power amp (max. 300 mA 12 V DC).
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Note:
When a subwoofer is connected to this unit
instead of a rear right speaker, do not connect the
rear left speaker lead to anything. For details, refer
to the Initial Setting Menu in the Operation
Manual.
Fig. 2
4