Installing the Stand
¦
Preset: Place the Guide Stand and Cover Neck onto the stand
N
and fasten it using the screws. Applicable to 32inch models only.
. Attach your LCD TV to the stand.
Two or more people should carry the TV.
N
Make sure to distinguish between the front and back of the
N
stand when attaching it.
To make sure the TV is installed on the stand at a proper
N
level, do not apply excess downward pressure to the upper
left of right sides of the TV.
. Fasten screws at position 1 and then fasten screws at position 2.
Stand the product up and fasten the screws. If you fasten
N
the screws with the LCD TV placed down, it may lean to one
side.
Disconnecting the Stand
¦
. Remove screws from the back of the TV.
. Separate the stand from the TV.
Two or more people should carry the TV.
N
. Cover the bottom hole with the cover.
English -
Back
Front
2
1