Samsung SCH-i830 Service Manual page 25

Write to Phone
Click this icon to write the selected parameter values to the phone. Writing the selected values to the
phone may take up to a minute. If there are dependencies in a field you can make all the changes in
the proper fields and download the information all together.
If you intend to use this write to Phone? feature, it is recommended that you do a "Read Data from
Phone" first, and then make the changes, so that nothing gets inadvertently overwritten.
NOTE: DO NOT TOUCH THE PHONE WHILE WRITING IS IN PROGRESS.
Software Download
Performing Software Upgrade
―
HW version : 1.2
SW version : ZH21 or later
Please use SamsungPST FW Setup1.0.002_MSI 2ndEdition and
PSTI830.dll ( Universal PST For Sprint 1.723 - [SCH-i830] or higher)
When the user downloads the S/W on the SCH-i830 device the user may use external power removing
battery from the device or a fully charged battery.
Install USB drivers (use MCCI USB driver version 4.16)
For data call test and downloading new s/w,
install two setup programs which located in the / USB_Driver directory.
A. SAMSUNG USB Modem driver_V4.16.zip (Phone USB)
B. MSASYNC.EXE
FIG 1. Active sync connection setting
From fig 1. Showing above is the correct configuration of active sync for data call and downloading.
When the user downloads the s/w on the i830 device the user may use travel charger, fully charged battery
or JIG ( refer to 15) connections.
(Active sync 4.1, it also install PDA USB driver)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
5-3
Product Support Tools