Table of Contents
Advertisement
Disassembly and Assembly instructions
5
1. Detach the SCREW RUBBER/SHEET with
tweezers.
2. Unscrew the FOLDER (4POINT).
3. Disassemble the UPPER from the LOWER
with a disassembling JIG.
※ caution
1) Be careful NOT TO SCRATCH the outward
appearance when using tweezers.
7
SPEAKER
DISASSEMBLY
GAP
MOTOR
DISASSEMBLY GAP
1. Disassemble the SPEAKER/MOTOR with
tweezers.
2. Detach the ESD TAPE from the LCD
※ caution
1) Do USE the disassembly gap when
disassembling SPEAKER/MOTOR.
2) Be careful NOT TO SCRATCH the outward
appearance when using tweezers.
This Document can not be used without Samsung's authorization
ESD
TAPE
SAMSUNG Proprietary-Contents may change without notice
6
1. After remove CAMERA FPCB from the
HINGE DUMMY, detach the CAMERA.
2. Remove the LCD FPCB from the HINGE
DUMMY.
3. Disassemble the LOWER from the FRONT
inserting tweezers into the gap of the right
side top.
※ caution
1) Be careful NOT TO SCRATCH the outward
appearance when using tweezers.
2) Do NOT OVERPOWER handling the FPCB.
8
1. Disassemble the LCD from the LOWER.
※ caution
1) Be careful NOT to damage MAIN WINDOW
and LCD/LOWER as the MAIN WINDOW
and LCD is a part.
2) Do NOT REUSE LCD/ESD TAPE/LOWER after
disassembly.
5-5
Advertisement
Table of Contents
