5
1) Attach the PBA to the FRAME after connect the INTENNA CABLE
to the cable connector on the back side of the PBA
7
1) Connect the KEY FPCB to the connector on the PBA and attach the TAPE on it
along the PCB SILK guide line by using the tweezers(pincette).
2) Connect the LCD CONNECTOR to the PBA.
Exploded View/Disassembly&Assembly Instructions
6
1) Attach the CAMERA ASS'Y to the PBA and connect CAMERA, MOTOR,
SPKEAKER CONNECTOR to the PBA.
2) Screw the 2 points on the CAMERA ASS'Y to fix it.
8
1) Attach the KEY FPCB(POWER, VOLUME, RECORD) to the FRAME according to
guide rules on the picture.
5-9