Exploded View/Disassembly&Assembly Instructions
― Assembly
1
1) Attach the KEY FPCB on the FRAME along by red marked hole on the picture.
- Be careful of damage of FPCB.
3
1) Screw the 2 points to the INTENNA to fix the FRAME.
2) Hold the INTENNA CABLE in the FRAME.
2
1) Attach the INTENNA CABLE to the connection point on the INTENNA
4
1) Remove the release paper(both-sided TAPE) from the FRAME and attach the LCD
to the FRAME along by the guide line on the left-top side of the frame.
5-8