Issues
The channel menu is greyed out.
(unavailable)
Your settings are lost after 30 minutes or
every time the TV is turned off.
You have intermittent loss of audio or
video.
You see small particles when you look
closely at the edge of the frame of the TV.
The PIP menu is not available.
You turned the TV off 45 minutes ago, and
it turned on again.
There are recurrent picture/sound issues.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
✎
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
Panel native
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel (Left / Right)
Model Name
Screen Size
Sound
(Output)
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
✎
Design and specifications are subject to change without prior notice.
✎
For information about power supply, and more about power consumption, refer to the label attached to the product.
Solutions and Explanations
•
The Channel menu is only available when the TV source is selected.
•
If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the
SOURCE
button to select TV mode, and go to
setup) → ENTERE. (p. 7)
•
Check the cable connections and reconnect them.
•
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
•
This is part of the product's design and is not a defect.
•
PIP functionality is only available when you are using a HDMI, PC or components source (p. 22).
•
It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
downloaded whilst your watching TV.
•
Check and change the signal/source.
•
To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
Specifications
UA40C7000
40 inches
10W x 2
957.4 x 26.5 x 578.7
957.4 x 267.7 x 648.4
13.2 kg
15.3 kg
MENU
→ Setup → Plug & Play (Initial
1920 x 1080 @ 60 Hz
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
-20˚ ~ 20˚
UA46C7000
46 inches
1092.3 x 26.5 x 653.2
1092.3 x 302.9 x 724.3
16.8 kg
19.1 kg
UC55C7000
55 inches
15W x 2
1283.3 x 26.5 x 762.1
1283.3 x 304.7 x 835.7
22.2 kg
24.5 kg
55
English