Picture Menu; Changing The Picture Options - Samsung 5 series User Manual

Picture Menu

Changing the Preset Picture Mode
¦
Mode
t
Select your preferred picture type.
Dynamic : Suitable for a bright room.
■
Standard : Suitable for a normal
■
environment.
: Suitable for reducing eye strain.
Natural
■
✎
Natural is not available in PC
mode.
: Suitable for watching movies in a dark room.
Movie
■
Adjusting picture settings
¦
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
x
In analogue TV, Ext., AV modes of the PAL system, the
Tint (G/R) function is not available.
x
In PC mode, you can only make changes to
Contrast and Brightness.
x
Settings can be adjusted and stored for each external
device connected to the TV.
x
Lowering picture brightness reduces power
consumption.
¦ Economical Solutions
ECO Solution
■ Energy Saving (Off / Low / Medium / High / Picture
t
Off / Auto) : Adjust the brightness of the TV
in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen.
ECO Sensor (Off / On) : To enhance your power
■
savings; the picture settings will automatically adapt to
the light in the room.
✎
If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
✎
Eco Sensor is On, the display brightness may
change (become slightly darker or brighter)
depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min / 30 min / 60 min)
■
Activates the Stand-by mode, in the case of "No Signal"
or "Check Signal Cable" status for a certain period of
time defined by the user.
✎
Disabled when the PC is in power saving mode.
SOURCE
0

Changing the Picture Options

¦
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
P.MODE
colour and contrast.
✎
In PC mode, you can only make changes to
Contrast, Gamma and White Balance.
Black Tone
I-II Dynamic Contrast
Shadow Detail
DUAL S.MODE
Gamma
rGB Only Mode
Colour Space
White Balance
SUBT.
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■
the screen contrast.
Backlight,
Shadow Detail (-2~+2)
■
images.
✎
Disabled under PC mode.
Gamma
■
■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint of Red, Green or Blue for the
picture from an external device (DVD player, home
theatre, etc.).
Colour Space (Auto / Native)
■
colors available to create the image.
White Balance
■
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
R-Gain/G-Gain/B-Gain: Adjust each colour's
(red, green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Flesh Tone
■
Edge Enhancement (Off / On)
■
boundaries.
:
Advanced Settings
: Off
: Medium
: 0
: 0
: Off
: Native
▼
U Move E Enter R return
: Increase the brightness of dark
: Adjust the primary colour intensity.
: Adjust the range of
: Adjust the colour temperature for a
: Emphasize pink "Flesh Tone."
: Emphasize object
HDMI
Dynamic
►
: Select the
: Adjust
15
English