Channel Menu; Manual Store; Retuning Channels; Auto Store - Samsung 5 series User Manual

Basic Features

Channel Menu

Retuning channels

¦
Antenna (Air / Cable / Satellite)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or Satellite system).
Country
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel : Change the country for digital channels.
■
Analogue Channel : Change the country for analogue
■
channels.

Auto Store

Scans for a channel automatically and stores in the TV.
✎
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If a
channel is locked using the Child Lock function, the PIN
input window appears.
When Antenna Source is set to Air or Cable:
Antenna Source (Air / Cable)
■
to memorise.
Channel Source (Digital & Analogue / Digital / Analogue)
■
Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital:
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them in
the TV.
✎
If you set Quick, you can set up Network, Network
ID, Frequency, Modulation, Symbol Rate manually
by press the button on the remote control.
Network (Auto / Manual): Selects the Network ID setting
mode among Auto or Manual.
Network ID: When Network is Manual, you can set up
Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel. (differs
in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
When Antenna Source is set to Satellite:
Channel Type (All / TV / Radio)
■
to memorise.
Satellite (All / Astra 19.2E)
■
Scan Mode (All Channels / Free Channels Only)
■
the scanning mode of the selected satellite.
12
English
: Select the antenna source
: Select the Channel type
: Selects the satellite to scan.
: Selects

Manual Store

Scans for a channel manually and stores in the TV.
✎
If a channel is locked using the
the PIN input window appears.
When Antenna Source is set to Air or Cable:
Digital Channel
■
are updated in the channel list.
✎
When selecting
Bandwidth
✎
When selecting
Modulation, Symbol Rate
Analogue Channel (Programme, Colour System,
■
Sound System, Channel, Search, Store): If there
is abnormal sound or no sound, reselect the sound
standard required.
✎
Channel mode
x
P (programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
x
C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
When Antenna Source is set to Satellite:
:
Satellite : Selects the satellite using the up/down
■
buttons.
Transponder : Selects the transponder using the up /
■
down buttons.
Scan Mode (All Channels / Free Channels Only):
■
Selects either free or all channels to store.
Network Search (Disable / Enable):
■
network search using the up/down buttons.
Signal Quality : Display the current status of
■
broadcasting signal.
✎
Information on a satellite and its transponder is subject
to change depending on the broadcasting conditions.
✎
When setting is completed, move to Search and press
the ENTERE button. Channel scan is started.
Child Lock function,
: When scanning has finished, channels
Antenna → Air: Channel, Frequency,
Antenna → Cable: Frequency,
Enable / Disable