Xerox DocuMate 3115 User Manual page 66

•
Reduce Moiré patterns
scanned images of photographs or illustrations, particularly newspaper and magazine
illustrations. Selecting
image. This option is only available when scanning in Color or Grayscale at lower resolutions, and
when the scanner supports this feature.
If you are scanning using an Automatic Document Feeder, and the page is fed through at too
great of an angle, the image may not straighten correctly. In that case, re-scan the page using the
paper guides to feed the paper in straight.
• —only available for Black&White Mode, this option reverses the black and whites of
Invert image
an image.
•
Skip blank originals
through the scanner, and remove it from the final file. Typically you might use this option when
scanning a stack of two-sided pages which have a number of blank sides.
—you can adjust the sensitivity level of the blank image detection.
Sensitivity
Note that when the Options tab feature
option selected is
When a blank page is detected
sensitivity level that will be used when both features are enabled.
Note that when the feature
selected is
When the number of images reaches
are counted. For example, if you scan 3 pages in duplex mode, each side of the page is counted as
an image and the total number of images is 6. When Skip Blank Originals is enabled, and 2 of the
3 pages in the stack are blank on one side, the total number of images counted is 4 not 6.
66 ®
Xerox DocuMate
User's Guide
—moiré patterns are wavy, rippled lines that sometimes appear on the
Reduce moiré patterns
Original Image
—select this option to have the scanner detect if a blank page has been fed
Use job separator in multi-page batch
Use job separator in multi-page batch
®
3115
will limit or eliminate moiré patterns in the scanned
Inverted Image
, the sensitivity level for Skip Blank Originals is the
is enabled, and the option
, the blank originals are discarded before the images
is enabled, and the