Step 3: Connect And Power On The Scanner - Xerox DocuMate 510 Installation Manual

Step 3: Connect and Power On the Scanner

DocuMate 510 Scanner Installation Guide
Connect the ADF cable, connect the scanner to a power source,
and turn the power on.
To connect the scanner and turn the power on:
1. Plug the ADF cable into the ADF port on the body of the
scanner.
2. Plug the power supply into its power port on the scanner.
NOTE: Only use the power supply (HEG42-240100-7L made by
HiTRON) included with your scanner. Connecting any other type
of power supply may damage your scanner and will void its
warranty.
3. Plug the power cord into the power supply and then into a wall
outlet.
Installation
11