Table of Contents
Advertisement
1.
2.
2. Remove the battery cover. Put a small screw driver in
the hole indicated by the two arrows. Carefully lift the
battery using the screw driver and replace it with a new
battery. Be carefull not to damage the threads of the
back cover.
3. Place the negative (-) side of the battery against the
bottom and the positive (+) side against the cover.
4. Remove the sealing ring of the battery cover and replace
it with a new ring. Make sure that the cover's sealing
ring is placed correctly in its groove.
78
CARE AND MAINTENANCE
1. Open the battery cover by
screwing it counterclockwise
(OPEN direction) with a coin
that sits tight into the back
cover groove.
5. Put the battery cover in its place and close it by
screwing the cover clockwise (CLOSE direction) with a
coin. Make sure that the cover is closed properly! It is
recommended that the altimeter or barometer is
calibrated after battery replacement.
Note:
• After a battery change re-enter the Basic Settings. For further
information, see page 9.
• Keep the batteries away from children. If swallowed, contact a
doctor immediately.
• Batteries should be disposed of properly according to local
regulations.
Advertisement
Table of Contents
