Advertisement

USER GUIDE
Polar T31/T31C Transmitter Maintenance
With good care your T31 / T31C heart rate sensor last longer. Dirt impairs the elasticity and
functioning of the heart rate sensor.
Wash the heart rate sensor regularly after use. T31 / T31C heart rate sensors should be
washed with a mild soap and water solution. After washing, dry the heart rate sensor carefully
with a soft towel.
If the electrodes appear discolored, you may use a gentle brush. Do not use any alcohol or a
solvent based detergent.
Rinse the elastic strap with water after every use and wash it regularly in a washing
machine at 40ºC/104ºF. This ensures reliable measurement and maximizes the life span of the
heart rate sensor. Use a washing pouch. Do not soak, spin-dry, iron, dry clean or bleach the strap.
Do not use detergent with bleach or fabric softener. Hang the elastic strap up to dry.
Wash the elastic strap in a washing machine before long-term storage, and always after use in
pool water with high chlorine content. Never put the heart rate sensor in the washing machine or
drier!
Never store the heart rate sensor wet, in a damp environment or in any kind of non-
breathing material, such as a plastic bag or a sports bag. Sweat and moisture may keep the
electrodes wet and the heart rate sensor activated. This will shorten the battery life. Keep in a
cool and dry place.
Do not bend or stretch the heart rate sensor. This may damage the electrodes.
How does a Polar Training Computer measure heart rate?
Heart rate is like a window into your physical condition. It tells you your body's exertion level.
The harder you train, the higher amount of oxygen you consume and the higher your heart rate
is. By listening to your heart rate, by peering through that window into your physical condition,
you get real-time guidance during training that is specific to you.
A Polar training computer helps you to listen to your body. Each training computer has two
parts: the training computer itself and a heart rate sensor to read your heart rate.

Advertisement

Table of Contents
loading

Summary of Contents for Polar Electro T31C

  • Page 1 USER GUIDE Polar T31/T31C Transmitter Maintenance With good care your T31 / T31C heart rate sensor last longer. Dirt impairs the elasticity and functioning of the heart rate sensor. Wash the heart rate sensor regularly after use. T31 / T31C heart rate sensors should be washed with a mild soap and water solution.
  • Page 2 The heart rate sensor is attached around the chest with an elastic strap. It detects your heart beat, the electric signal of the heart, at the accuracy and reliability of the electrocardiogram (ECG). It then gives a timing reference for the heart beat occurrences and transmits the information to the training computer.
  • Page 3 Find nearest Polar retailer from Polar Service Finder. With good care your T31/T31C Transmitter will last longer. Washing the heart rate sensor regularly and never storing it wet ensures reliable measurement and maximizes its life span. See here for detailed care and maintenance instructions.
  • Page 4 3. Place the heart rate sensor back onto your chest and keep the Training Computer in this interference-free area as much as possible. If the Training Computer still does not work with the exercise equipment, it may be electrically too noisy for wireless heart rate measurement. What sensors and accessories is my Polar training computer compatible with? Compatible heart rate sensors...
  • Page 5: Table Of Contents

    Transmission technology non-coded A300 *** A360, A370 *** CS500+, CS600X FA20** FT1, FT2 FT4, FT7, FT40, FT60, FT80 M200 *** M400 *** M430 *** M450 *** M460 ***...
  • Page 6 (Polar app on the) M600 Polar Active ** Polar Loop*** Polar Loop 2 Polar Loop Crystal*** Polar Move RC3 GPS RCX3 RCX5 RS100 RS300X RS400 RS800CX V800*** V650*** Vantage M Vantage V...
  • Page 7: A300

    x Compatible Incompatible z This training computer uses GymLink transmission. You can use a non-coded GymLink transmission with this training computer, too, but then Polar OwnCode® feature is not supported. If the training computer does not find the GymLink heart rate signal at the beginning of the exercise (in approx.
  • Page 8: M400

    FT60 FlowLink s1 Universal FT80 FlowLink s1 Universal CS500+ DataLink CS W.I.N.D. CS W.I.N.D. Dual Lock W.I.N.D. / Kéo Power CS600X IrDA USB CS W.I.N.D. CS W.I.N.D. Twist Lock G3 / W.I.N.D. / Kéo Power M400 USB Cable Stride Universal Polar Sensor Balance...
  • Page 9: Rs400

    RS400 IrDA USB s1 Universal RS800CX IrDA USB s3 / s3+ G3 / CS W.I.N.D. CS W.I.N.D. Universal V800 USB Cable Stride Universal Speed Cadence Kéo Power Polar Sensor Sensor Sensor Bluetooth Balance Bluetooth Bluetooth Bluetooth Smart scale Smart Smart Smart V650 USB Cable...

This manual is also suitable for:

T31

Table of Contents