Nikon COOLPIX S2600 Reference Manual page 188

Troubleshooting
Problem
The recorded images are
not displayed in auto sort
mode.
Nikon Transfer 2 does not
start when camera is
connected.
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
Images to be printed are
not displayed.
Cannot select paper size
with camera.
F14
Cause/Solution
• The desired image was sorted to a category
other than the category currently displayed.
• Images recorded by a camera other than the
COOLPIX S2600 and images copied using the
copy option cannot be displayed in auto sort
mode.
• Images recorded in internal memory or on
the memory card may not be played back
correctly if overwritten by a computer.
• Up to 999 images or movie files can be
added to each category. If the desired
category already contains 999 images, new
images or movies cannot be added.
• Camera is off.
• Battery is exhausted.
• USB cable is not properly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically. For more information on
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed
and it may be impossible to print images when
Auto is selected for the Charge by computer
option in the setup menu. Set the Charge by
computer option to Off and reconnect the
camera to the printer.
• Memory card contains no images. Replace
the memory card.
• Remove the memory card to print images
from the internal memory.
Paper size cannot be selected from the camera
in the following situations, even when printing
from a PictBridge-compatible printer:
• The printer does not support the paper size
specified by the camera.
• The printer automatically selects the paper
size.
A
66, E7
66, E8,
E46
–
66, E8
21
20
68
–
69
69
68, E61
18
68, E20,
E21
–