Nikon COOLPIX S2600 Reference Manual page 182

Troubleshooting
Problem
Monitor is blank.
Monitor is hard to read.
Date and time of recording
are not correct.
No indicators displayed in
monitor.
Print date not available.
Date not appearing on
images even when Print
date is enabled.
Screen for setting time
zone and date is displayed
when the camera is turned
on.
Camera settings reset.
F8
Cause/Solution
• Camera is off.
• Battery is exhausted.
• Standby mode for saving power. Press the
power switch, shutter-release button, A
button, c button, or b (e movie-record)
button.
• When flash lamp flashes, wait until flash has
charged.
• Camera and computer are connected via
USB cable.
• Camera and TV are connected via audio/
video cable.
• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.
• If camera clock has not been set, "Date not
set" indicator flashes with shooting and
movie recording. Images and movies
recorded before clock is set are dated "00/
00/0000 00:00" or "01/01/2012 00:00"
respectively. Set the correct time and date
from the Time zone and date option in the
setup menu.
• Check camera clock regularly against more
accurate timepieces and reset as required.
Hide info is selected for Photo info.
Select Show info.
Camera clock has not been set.
• The current shooting mode is one that does
not support Print date.
• The date cannot be imprinted on movies.
Clock battery is exhausted; all settings were
restored to their default values.
A
21
20
21
50
68, 71
68, E17
82, E53
F6
22, E50
23, E50
82, E53
22, 82,
E50
82, E55
22, 23