Nikon COOLPIX S2600 Reference Manual page 184

Troubleshooting
Problem
Camera cannot focus.
Images are blurred.
Streaks of light or partial
discoloration are visible in
the monitor.
Bright specks appear in
images captured with flash.
Flash does not fire.
Optical zoom cannot be
used.
F10
Cause/Solution
• The subject is too close to the camera. Try
shooting using macro mode, or Scene auto
selector or Close-up scene mode.
• The intended subject is one with which
autofocus does not perform well.
• Select Auto for AF assist in the set up
menu.
• Turn camera off and then on again.
• Use flash.
• Increase the ISO sensitivity value.
• Enable electronic vibration reduction or
motion detection.
• Use BSS.
• Use tripod and self-timer.
Smear occurs when extremely bright light
strikes the image sensor. When shooting with
Continuous set to Multi-shot 16 and when
recording movies, avoiding bright objects, such
as the sun, reflections of the sun, and electric
lights is recommended.
Flash is reflecting off particles in air. Set the flash
mode setting to W (Off).
• The flash mode is set to W (Off).
• Some scene modes with which the flash
does not function is selected.
• On is selected for Blink proof in smart
portrait menu.
• Another function that restricts flash is
enabled.
Optical zoom cannot be used while recording
movies.
A
39, 43, 53
29
83, E58
21
50
37, E28
83, E56,
E57
37, 43,
E26
52
E27,
F3
51
51
55
48
59
75