Electrical Requirements - Haier HWD1600BW User Manual

ELECtriCaL rEquirEmEnts

The washer must be connected to a properly grounded 120 Volt, 60 Hz.,
AC only, 15 Amp, fused electrical supply. A time-delay fuse or circuit
breaker is recommended.
• If the electric supply provided does not meet the above requirements, contact a
licensed electrician.
This appliance must be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an
escape route for the electrical current.
• The washer is equipped with a power cord that has a 3 prong plug. Do not cut or
remove the grounding prong from the power cord.
• The power cord must be plugged into a mating, 3 prong outlet, grounded in
accordance with local codes and ordinances. If a mating outlet is not available,
contacted a licensed electrician to have one installed.
• Do not use a 3 prong plug adapter.
• If you are not sure if your outlet is properly grounded, contact a licensed
electrician.
• Do not use an extension cord.
14
Warning
Warning