Table of Contents
Advertisement
When the
or
High-speed cooling in
progress
You can continue projecting in
Orange
this state. Projection stops
Green
automatically if subsequent
high temperatures are
registered.
Lamp replacement notification
Orange
It is time to replace the lamp. Replace the lamp with a new one as soon as possible.
If you continue use when in this state, it is possible that the lamp may explode.
Green
When the
or
Orange
Orange
Green
Green
Green
Green
Green
Green
Green
Orange
Green
Green
Green
indicators flash orange
Check the 2 items listed to the
right.
• Move this unit away from the
wall by at least 20 cm.
• Clean the air filter.
s
indicators are off
Standing-by
Warming up
(approx. 20 seconds)
Projection in
Progress
Cooling down
(approx. 9 seconds)
Break
Warning
p. 62
Normal
Shows that this unit is ready to be used.
In warm-up mode pressing
Do not turn off the power or unplug the unit during warm-up, as this
may reduce the lifespan of the lamp.
The operation of all remote control and main unit buttons is suspended
during cool-down.
Enters stand-by mode once cool-down has completed.
Do not turn off the power or unplug the unit during cool-down, as this
may reduce the lifespan of the lamp.
Press
to return to normal playback.
: lit
: flashing
If there is no improvement
when you press
and
switch the power on,
discontinue use and
disconnect the power cable
from the electrical outlet.
Contact your dealer.
s
p. 74
s
p. 64
: lit
: flashing
or
has no effect.
: off
: off
59
Advertisement
Table of Contents
