Table of Contents
Advertisement
. To delete specific files
1.
Press [ ] (Delete).
2.
Use [
] and [2] to select "Delete Files" and then press [SET].
8
• This displays a file selection screen.
3.
Use [
], [2], [4], and [6] to move the selection boundary to the file
8
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
4.
Repeat step 3 to select other files, if you want. After you are finished
selecting files, press [ ] (Delete).
5.
Use [
] and [2] to select "Yes" and then press [SET].
8
• This deletes the files you selected.
• To exit the delete operation, press [
. To delete all files
1.
Press [ ] (Delete).
2.
Use [
] and [2] to select "Delete All Files" and then press [SET].
8
3.
Use [
] and [2] to select "Yes" and then press [SET] to delete all files.
8
This will cause the message "There are no files." to appear.
Snapshot Shooting Precautions
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand
when shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded at the quality set for the image quality setting (page 63).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
] (Delete).
30
Quick Start Basics
Advertisement
Table of Contents
