1. Manuals
  2. Brands
  3. Casio Manuals
  4. Digital Camera
  5. EXILIM EX-H20G
  6. User manual

Casio EXILIM EX-H20G User Manual

Casio digital camera user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E

Digital Camera

User's Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User's Guide.
• Keep the User's Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
To go to "Getting the Most Out of Dynamic Photo" click here!
1

Advertisement

Table of Contents
loading

Related Manuals for Casio EXILIM EX-H20G

Summary of Contents for Casio EXILIM EX-H20G

  • Page 1: Digital Camera

    Digital Camera User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/...

  • Page 2: Unpacking

    Unpacking As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer. Digital camera * The shape of the power cord plug varies according to country or geographic area.

  • Page 3: Read This First

    • CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product.

  • Page 4: Table Of Contents

    What is a digital camera? ........14 What you can do with your CASIO camera ......15 First, charge the battery prior to use..
  • Page 5 Zooming with Super Resolution ....(Single SR Zoom) . . . 49 Recording Movie Images To record a movie ..........50 Using BEST SHOT What is BEST SHOT? .
  • Page 6 Viewing Snapshots and Movies Viewing Snapshots ..........73 Viewing a Movie.
  • Page 7 Saving All Positioning Log Data in Camera Memory to a Memory Card Enabling Movement of the Image Cursor ....(Move Cursor) . . 106 Adjusting the Accuracy of the Direction Sensor ..(Direction Adj) . . 106 Converting Location Information of Images from Another Source for Playback on This Camera .
  • Page 8 Other Settings Adjusting Monitor Screen Brightness ..... (Screen) . 140 Turning off Eye-Fi Card Communication ....(Eye-Fi) . 140 Enabling the GPS Function .
  • Page 9 When things don’t go right........170 Troubleshooting .

  • Page 10: General Guide

    General Guide The numbers in parentheses indicate the pages where each item is explained. . Camera Front Zoom controller (pages 26, 47, 75, 76) Shutter button (page 27) GPS antenna (page 97) Microphone (pages 25, 51) Front lamp (pages 44, 62) Lens Flash (page 37) [ù] (Current Location)

  • Page 11: Monitor Screen Contents

    Charger Unit Monitor Screen Contents The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera.

  • Page 12: Movie Recording

    . Movie Recording . Snapshot Viewing bmbl Recording mode (page 50) White balance setting (page 69) Remaining movie memory capacity (page 50) Movie recording time (page 50) Exposure compensation (page 46) Battery level indicator (page 19) Histogram (page 152) GPS wave condition icon (pages 93, 103) File type Protect indicator (page 87) Folder name/file name (page 137)

  • Page 13: Movie Playback

    . Movie Playback NOTE • For details about MAP mode display contents, see “Using the Hybrid-GPS” (page 91). File type Protect indicator (page 87) Folder name/file name (page 137) Movie recording time (page 73) Movie image quality (page 66) Date/time (page 47) Shooting location name (page 94) Battery level indicator (page 19) Latitude, longitude (page 93)

  • Page 14: Quick Start Basics

    Quick Start Basics What is a digital camera? A digital camera stores images on a memory card, so you can record and delete images a countless number of times. Record Delete Play You can use the images you record in a variety of different ways.

  • Page 15: What You Can Do With Your Casio Camera

    What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following three main functions. Hybrid-GPS The Hybrid-GPS of your camera provides both...
  • Page 16 BEST SHOT Simply select the sample scene you want and the camera sets up automatically. Then all you need to do is press the shutter button for perfect images. See page for more information. Quick Start Basics...

  • Page 17: First, Charge The Battery Prior To Use

    Note that the battery of a newly purchased camera is not charged. Perform the steps under “To charge the battery” to bring the battery to a full charge. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-90) for power. Never try to use any other type of battery.

  • Page 18: To Load The Battery

    Other Charging Precautions • Use the special charger (BC-90L) to charge the special lithium ion battery (NP-90). Never use any other type of charger device. Attempting to use a different charger can result in an unexpected accident. • A battery that is still warm due to normal use may not charge fully. Give the battery time to cool before charging it.
  • Page 19 Close the battery cover. Close the battery cover and then shift the slider towards LOCK. • For information about how to replace the battery, see page 161. Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below.

  • Page 20: Configuring Basic Settings The First Time You Turn On The Camera

    Configuring Basic Settings the First Time You Turn On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.
  • Page 21 Use [8] and [2] to select “Auto” or “Premium Auto” as the auto recording mode (page 26) and then press [SET]. • After configuring the auto recording mode setting you want here, you can change the current auto recording setting by selecting the “Auto” or “Premium Auto”...

  • Page 22: Preparing A Memory Card

    Preparing a Memory Card Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images and movies recorded while a memory card is loaded are saved to the memory card.

  • Page 23: To Format (Initialize) A New Memory Card

    • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your retailer or nearest CASIO authorized service center. To format (initialize) a new memory card You need to format a new memory card before using it for the first time.

  • Page 24: Turning The Camera On And Off

    Turning the Camera On and Off To turn power on To turn on Press [ON/OFF] (Power) or [r] power and enter (REC). the REC mode • The back lamp will light green momentarily and the lens will extend out of the camera (page 26). To turn on Press [p] (PLAY).

  • Page 25: Holding The Camera Correctly

    Holding the Camera Correctly Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot.

  • Page 26: To Shoot A Snapshot

    To shoot a snapshot Selecting an Auto Recording Mode You can select one of two auto recording modes (Auto or Premium Auto) according to your digital imaging needs. This is the standard Auto recording mode. Auto • It provides faster operation than Premium Auto recording. With Premium Auto recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions.

  • Page 27: To Shoot A Snapshot

    To shoot a snapshot Point the camera at the subject. If you are using Premium Auto, text will appear in the lower right corner of the monitor screen describing the type of shot the camera has detected. • You can zoom the image, if you want. Zoom controller •...

  • Page 28: Shooting With Auto

    Continuing to keep the camera still, press the shutter button the rest of the way down. This records the snapshot. Full-press Snap (Image is recorded.) . If the image does not focus... If the focus frame stays red and the back lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.).
  • Page 29 . Shooting with Premium Auto • In addition to shutter speed, aperture, and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto. – Auto Focus is normally performed until you half-press the shutter button. –...

  • Page 30: Viewing Snapshots

    Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 73. Press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory.

  • Page 31: Deleting Snapshots And Movies

    Deleting Snapshots and Movies If memory becomes full, you can delete snapshots and movies you no longer need to free up storage and record more images. IMPORTANT! • Remember that a file (image) delete operation cannot be undone. • The delete menu will not appear if you press [2] ( the camera’s “Ü...

  • Page 32: To Delete All Files

    To delete all files Press [p] (PLAY) to enter the PLAY mode and then press [2] ( Use [ ] and [2] to select “Delete All Files” and then press [SET]. Use [ ] and [2] to select “Yes” and then press [SET] to delete all files. This will cause the message “There are no files”...

  • Page 33: Auto Focus Restrictions

    Auto Focus Restrictions • Any of the following can make proper focus impossible. – Solid color wall or other very low contrast subject – Strongly back lit subject – Very shiny subject – Blinds or other subject with a repeating horizontal pattern –...

  • Page 34: Snapshot Tutorial

    Snapshot Tutorial Using the Control Panel The Control Panel can be used to configure camera settings. In the REC mode, press [SET]. This will select one of the Control Panel icons and display its settings. [8] [2] [4] [6] [SET] Use [8] and [2] to select the setting you want to change.

  • Page 35: Changing The Image Size

    Changing the Image Size (Size) . Pixels A digital camera image is a collection of small dots called “pixels”. The more pixels there are in an image, the more detail there will be. However, you generally can do with fewer...
  • Page 36 . To select the image size In the REC mode, press [SET]. Use [8] and [2] to select the top Control Panel option (Image Size). Use [ ] and [6] to select an image size and then press [SET]. Suggested Image Size Print Size and (Pixels)

  • Page 37: Using Flash

    Using Flash (Flash) In the REC mode, press [2] ( Use [4] and [6] to select the flash setting you want and then press [SET]. Flash fires automatically in accordance with exposure Auto Flash > (amount of light and brightness) conditions. Flash Off Flash does not fire.
  • Page 38 NOTE • Take care so your fingers and the strap do not block the flash. • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time (page 182) depends on operating conditions (battery condition, ambient temperature, etc.) •...

  • Page 39: Selecting A Focus Mode

    Selecting a Focus Mode (Focus) You can select a focus mode setting. In the REC mode, press [SET]. Use [8] and [2] to select the third Control Panel option from the top (Focus). Use [4] and [6] to select the setting you want and then press [SET]. Settings Type of Shot Q Auto...

  • Page 40: Super Macro

    Super Macro Super Macro fixes optical zoom at a position that allows you to shoot from the closest distance to the subject. The result is closer and larger subject images. NOTE • Zoom is fixed while Super Macro is selected, so no zoom operation is performed when you slide the zoom controller.

  • Page 41: Specifying The Auto Focus Area

    Using Focus Lock “Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. • To use focus lock, select “Û Spot” for the Auto Focus area (page 41).
  • Page 42 In the REC mode, press [SET]. Use [8] and [2] to select the fourth Control Panel option from the top (AF Area). Use [4] and [6] to select the setting you want and then press [SET]. Point the camera at the subject and half-press the shutter button. Wait until the camera adjusts exposure and focus automatically.

  • Page 43: Specifying Iso Sensitivity

    Specifying ISO Sensitivity (ISO) ISO sensitivity is a measure of sensitivity to light. In the REC mode, press [SET]. Use [8] and [2] to select the fifth Control Panel option from the top (ISO Sensitivity). Use [4] and [6] to select the setting you want and then press [SET]. AUTO Adjusts sensitivity automatically according to conditions ISO 80...

  • Page 44: Using The Self-Timer

    Using the Self-timer (Self-timer) With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. In the REC mode, press [SET]. Use [8] and [2] to select the sixth Control Panel option from the top (Self-timer).

  • Page 45: Using Face Detection

    Using Face Detection (Face Detection) When shooting people, the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly. In the REC mode, press [SET]. Use [8] and [2] to select the third Control Panel option from the bottom (Face Detection).

  • Page 46: Correcting Image Brightness

    Correcting Image Brightness (EV Shift) You can manually adjust an image’s exposure value (EV value) before shooting it. • Exposure Compensation Range: –2.0EV to +2.0EV • Unit: 1/3EV In the REC mode, press [SET]. Use [8] and [2] to select the second Control Panel option from the bottom (EV Shift).

  • Page 47: Changing The Control Panel Date/Time Style

    Changing the Control Panel Date/Time Style In the REC mode, press [SET]. Use [8] and [2] to select the bottom Control Panel option (Date/Time). Use [4] and [6] to select the date or time. NOTE • You can select either of two display style (page 146) for the date: Month/Day or Day/Month.

  • Page 48: Interpreting The Zoom Bar

    Interpreting the Zoom Bar During a zoom operation, a zoom bar appears on the monitor screen to show the current zoom setting. Range where image deterioration is suppressed. (optical zoom, HD Zoom, Single SR Zoom) Optical zoom limit point • 10.0X optical zoom point Point from which image deteriorates.

  • Page 49: Zooming With Super Resolution

    . Zoom Factor The digital zoom factor depends on the image size (page 35) and on whether Single SR Zoom is enabled or disabled. Maximum zoom factor where image deterioration can be suppressed Image size Single SR Zoom: 16:9 Zooming with Super Resolution (Single SR Zoom) Super resolution technology makes it possible to expand the zoom range in which image deterioration is minimized.

  • Page 50: Recording Movie Images

    Recording Movie Images To record a movie Configure the quality setting for the movie (page 66). The length of the movie you can record will depend on the quality setting you select. In the REC mode, point the camera at the subject and then press [0] (Movie).
  • Page 51 NOTE • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • The camera also records audio. Note the following points when shooting a movie. –...

  • Page 52: Using Best Shot

    Using BEST SHOT What is BEST SHOT? BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically.
  • Page 53 NOTE • The BEST SHOT YouTube scene sets up the camera for recording movies that are optimized for uploading to YouTube. Movies recorded with the YouTube scene are stored in a special folder to make them easy to locate for uploading (page 138). .

  • Page 54: Creating Your Own Best Shot Setups

    Creating Your Own BEST SHOT Setups You can save up to 999 camera setups as user BEST SHOT scenes for instant recall whenever you need them. On the BEST SHOT scene menu, select the scene named “BEST SHOT” (Register User Scene). Use [4] and [6] to select the snapshot or movie whose setup you want to save.

  • Page 55: Shooting A Panorama Image

    Shooting a Panorama Image (Slide Panorama) With Slide Panorama, you move the camera to compose and record multiple images, which are then combined to a panorama. This feature lets you shoot a panorama of up to 360 degrees, which is dramatically greater than the physical capabilities of the lens.
  • Page 56 NOTE • The following conditions are not compatible with Slide Panorama shooting. – Subject whose brightness is very different from that of its surroundings due to artificial light, sunlight, etc. – Rivers, waves, waterfalls, or other subject with constantly changing patterns –...

  • Page 57: Recording A Self-Portrait

    Recording a Self-portrait With this feature, you can shoot your own self-portrait simply by pointing the camera at your face. BEST SHOT has two self-portrait scenes from which to choose. • Self-portrait (1 person): Shoots when the face of at least one person, including •...

  • Page 58: Advanced Settings

    Advanced Settings The following are menu operations you can use to configure various camera settings. • You also can use the Control Panel (page 34) to configure some of the settings that appear on the menu screen. Refer to the page references provided in this section for information about configuring settings using the Control Panel.
  • Page 59 . Menu Operations in This Manual Menu operations are represented in this manual as shown below. The following operation is the same one described under “Example Menu Screen Operation” on page 58. Procedure [r] (REC) * [MENU] * REC Tab * Focus Press Press [r] (REC).

  • Page 60: Rec Mode Settings

    REC Mode Settings (REC) Selecting a Focus Mode (Focus) Procedure [r] (REC) * [MENU] * REC Tab * Focus For details, see the Control Panel procedure on page 39. Using the Self-timer (Self-timer) Procedure [r] (REC) * [MENU] * REC Tab * Self-timer For details, see the Control Panel procedure on page 44.

  • Page 61: Reducing The Effects Of Camera And Subject Movement

    Your digital camera is equipped with a CCD shift type camera shake correction feature and a high-sensitivity anti image blur feature. These two features work in concert to minimize the effects of hand and subject movement.

  • Page 62: Using The Auto Focus Assist Light

    Using the Auto Focus Assist Light (AF Assist Light) Procedure [r] (REC) * [MENU] * REC Tab * AF Assist Light Half-pressing the shutter button while this setting is selected causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim.

  • Page 63: Turning Digital Zoom On Or Off

    Turning Digital Zoom On or Off (Digital Zoom) Procedure [r] (REC) * [MENU] * REC Tab * Digital Zoom You can use this setting to turn digital zoom on or off. When digital zoom is turned off, operating the zoom controller zooms the image with optical zoom only. Displaying the On-screen Grid (Grid) Procedure [r] (REC) * [MENU] * REC Tab * Grid...

  • Page 64: Configuring Power On Default Settings

    Configuring Power On Default Settings (Memory) Procedure [r] (REC) * [MENU] * REC Tab * Memory When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera.

  • Page 65: Image Quality Settings

    Image Quality Settings (Quality) Shooting Snapshots of better Texture and Sharpness (Single SR Quality) Procedure [r] (REC) * [MENU] * Quality Tab * Single SR Quality Super resolution technology is used to categorize an image into three parts: an outline part, a fine pattern part, and a flat part, and then perform the optimum process required by each part to increase texture and sharpness.

  • Page 66: Specifying Snapshot Image Quality (Quality (Snapshot))

    Specifying Snapshot Image Quality (Quality (Snapshot)) Procedure [r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot) Fine Gives image quality priority. Normal Normal • The “Fine” setting helps to bring out details when shooting a finely detailed image of nature that includes dense tree branches or leaves, or an image of a complex pattern.

  • Page 67: Recording Beautiful Images Of People And Scenery

    Recording Beautiful Images of People and Scenery (Effect) Procedure [r] (REC) * [MENU] * Quality Tab * Effect When either mode described below is selected, the camera will automatically touch up people and scenery to help ensure beautiful images every time. This mode smoothes the skin texture of the subject and Make-up softens facial shadows caused by harsh sunlight for better...

  • Page 68: Correcting Image Brightness

    . Shooting Beautiful Scenery Images (Landscape) Enter the Landscape Mode • Entering the Landscape Mode causes the Ö to appear on the Control Panel. Press [SET]. Use [4] and [6] to select the Landscape Mode setting (third Control Panel option from the bottom), and then press [SET].

  • Page 69: Controlling White Balance

    Controlling White Balance (White Balance) Procedure [r] (REC) * [MENU] * Quality Tab * White Balance You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.

  • Page 70: Specifying Iso Sensitivity

    Specifying ISO Sensitivity (ISO) Procedure [r] (REC) * [MENU] * Quality Tab * ISO For details, see the Control Panel procedure on page 43. Specifying the Metering Mode (Metering) Procedure [r] (REC) * [MENU] * Quality Tab * Metering The metering mode determines what part of the subject is metered for exposure. Multi-pattern metering divides the image into sections and measures the light in each section for a balanced exposure reading.

  • Page 71: Optimizing Image Brightness

    Optimizing Image Brightness (Lighting) Procedure [r] (REC) * [MENU] * Quality Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas when shooting images. Performs brightness correction. When this option is selected, it takes longer for the image to be stored after the shutter button is pressed.

  • Page 72: Adjusting Image Contrast

    Adjusting Image Contrast (Contrast) Procedure [r] (REC) * [MENU] * Quality Tab * Contrast You can specify one of five contrast settings from +2 (most contrast between light and dark) to –2 (least contrast between light and dark). Specifying Flash Intensity (Flash Intensity) Procedure [r] (REC) * [MENU] * Quality Tab * Flash Intensity You can specify one of five flash intensity settings, from –2 (weakest) to +2...

  • Page 73: Viewing Snapshots And Movies

    Viewing Snapshots and Movies Viewing Snapshots See page 30 for the procedure for viewing snapshots. Viewing a Movie Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. Press [SET] to start playback. Movie Playback Controls [4] [6] Fast forward/...

  • Page 74: Viewing A Panorama Image

    Viewing a Panorama Image Press [p] (PLAY), and then use [4] and [6] to display the panorama images you want to view. Press [SET] to start playback of the panorama. Panorama playback causes the image to scroll left, right, up, or down. Playback Controls To start or pause playback...

  • Page 75: Zooming An On-Screen Image

    Zooming an On-screen Image In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. Slide the zoom controller towards z ( zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen.

  • Page 76: Displaying Images In The Calendar Screen

    Displaying Images in the Calendar Screen In the PLAY mode, slide the zoom controller towards w (]) twice. This will display the calendar screen that shows the first image recorded on each day. To display the first image recorded on a particular day, use [8], [2], [4], and [6] to move the selection boundary to the day you want and then press [SET].
  • Page 77 Turn on the TV and select its video input mode. If the TV has more than one video input, select the one where the camera is connected. Press [p] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen.

  • Page 78: Viewing High-Quality Movies On A Hi-Vision Television

    Viewing High-quality Movies on a Hi-Vision Television Use a commercially available HDMI cable to connect the camera to the TV. For information about playback, see page 76. • Use a commercially available HDMI cable that is marked with the logo shown to the right.
  • Page 79 . Selecting the HDMI Terminal Output Method (HDMI Output) Procedure [MENU] * Set Up Tab * HDMI Output Use this setting to select the digital signal format when connecting to a TV with an HDMI cable. This setting will cause the format to change automatically in accordance Auto with the connected TV.

  • Page 80: Other Playback Functions (Play)

    Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. For information about menu operations, see page 58. Playing a Slideshow on the Camera (Slideshow) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Slideshow Start Starts the slideshow.
  • Page 81 Interval Amount of time each image remains displayed Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”. If you specify a value from 1 to 30 seconds, images change at the specified interval, but the movies will continue to play until the end. When the slideshow reaches a movie file while “MAX”...

  • Page 82: Saving Music From Your Computer To Camera Memory

    Saving Music from Your Computer to Camera Memory You can replace the built-in slideshow background music with other music from your computer. Supported File Types: • PCM format (16-bit, monaural) WAV files • Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz Number of Files: 9 File names: SSBGM001.WAV to SSBGM009.WAV •...

  • Page 83: Creating A Snapshot Of Movie Frames

    Creating a Snapshot of Movie Frames (MOTION PRINT) Procedure [p] (PLAY) * Movie Screen to be Used * [MENU] * PLAY Tab * MOTION PRINT Use [4] and [6] to scroll through the movie frames and display the one you want to use as the image of the MOTION PRINT image. Holding down [4] or [6] scrolls at high speed.
  • Page 84 When the frame where you want the cut point to be is displayed, press [2]. (To-Point Cut) (Point-To-Point Cut) ¡ (From-Point Cut) Use [8] and [2] to select “Yes” and then press [SET]. The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy...

  • Page 85: Optimizing Image Brightness

    Optimizing Image Brightness (Lighting) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas in existing images. Performs a higher level of brightness correction than the “+1” setting. Performs brightness correction.

  • Page 86: Adjusting The Brightness Of An Existing Snapshot

    NOTE • You also can adjust the white balance when recording images (page 69). • The original snapshot is retained in memory and not deleted. • When you display an altered image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered.

  • Page 87: Protecting A File Against Deletion

    Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Protect Protects specific files. Use [4] and [6] to scroll through the files until the one you want to protect is displayed. Use [8] and [2] to select “On” and then press [SET].

  • Page 88: Editing The Date And Time Of An Image

    Editing the Date and Time of an Image (Date/Time) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time [8] [2] Changes the setting at the cursor location [4] [6] Moves the cursor between settings [BS] Toggles between 12-hour and 24-hour format When the date and time settings are what you want, press [SET] to apply them.

  • Page 89: Rotating An Image

    Rotating an Image (Rotation) Procedure [p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab * Rotation Use [8] and [2] to select “Rotation” and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left. When the displayed image is at the orientation you want, press [MENU].

  • Page 90: Cropping A Snapshot

    Cropping a Snapshot (Trimming) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file. The original snapshot is also retained. Use the zoom controller to zoom the image to the size you want, use [8], [2], [4], and [6] to display the portion of the image you want to cut out, and then press [SET].

  • Page 91: Using The Hybrid-Gps

    Using the Hybrid-GPS In addition to conventional Global Positioning System (GPS) system capabilities that determine your current location and time based on radio waves it picks up from GPS satellites, your EXILIM camera also features a built-in independent motion sensor employing autonomous positioning technology that uses a 3-axis bearing sensor and a 3-axis accelerometer.

  • Page 92: Recording Current Location Information (Latitude, Longitude, Direction, Place Name) With Image Data

    Recording Current Location Information (Latitude, Longitude, Direction, Place Name) with Image Data Enabling the GPS Function (GPS) Before using the Hybrid-GPS function for the first time, perform in the following steps to turn it on and receive GPS satellite waves. Take the camera outside to a location where there is an unobstructed path to the sky above.

  • Page 93: Recording Location Information With Image Data

    Recording Location Information with Image Data (Record Lat/Long) While “On” is selected for the “Record Lat/Long” setting, location information (latitude, longitude, camera aiming direction) as measured by the Hybrid-GPS will be recorded along with the image data (snapshots and movies). In the REC mode, press [MENU].

  • Page 94: Inserting The Place Name Into Image Data

    NOTE • You can delete recorded latitude, longitude, and direction data as required (page 109). • Recorded latitude, longitude, and direction data cannot be edited. • Shooting an image while on the move may result in incorrect position information being registered with the image. •...
  • Page 95 . About place names • Place name candidates are those selected from among the country and landmark names in camera memory based upon current latitude and longitude measurements. • “– – –” will be shown in place of the candidates if there is no appropriate place name at your current latitude and longitude.

  • Page 96: Stamping The Place Name Into An Image

    Stamping the Place Name into an Image (Stamp Place) You can use this procedure to select from among the place names (country names, landmark names) in camera memory and stamp a place directly into the image (snapshots). IMPORTANT! • Unlike place name insertion, once a place name is stamped into a snapshot, it cannot be edited or deleted.

  • Page 97: Precautions When Using The Hybrid-Gps

    Precautions when Using the Hybrid-GPS • Better GPS satellite wave reception can be attained by holding the camera still with the GPS antenna pointed towards the sky. • Since GPS satellites are constantly moving, your location, the time of day, and other conditions may cause it to take some time before positioning can be performed.
  • Page 98 • The Hybrid-GPS is able to provide position information (latitude and longitude) even under conditions where waves cannot be received from GPS satellites. However, relying solely on the motion sensor for long periods where GPS satellite reception conditions are poor, under an underpass or on a steel bridge, or in the vicinity of buildings, pedestrian bridges, electrical equipment, steel desks, steel chairs, or other objects that generate magnetism can result in bearing, latitude, and longitude reading errors.

  • Page 99: Using The Map Data Stored In Camera Memory

    Using the Map Data Stored in Camera Memory (MAP Mode) After you press [ý] (MAP) to enter the MAP mode, you can view the map data stored in memory and use it to perform a variety of operations described in this section.

  • Page 100: Map Mode Monitor Screen Content

    MAP Mode Monitor Screen Content . User Image Mode The User Image Mode screen shows images that you shot on the map screen, along with icons and numbers that provide a wealth of information. 234 5 Zoom bar Shows the current scale/position and scale/position range of the currently displayed map.
  • Page 101 User image mark Locations where you shot images are indicated by marks. • User image marks are normally blue. However, user image marks outside of the radar screen lines are light blue. • A white wedge within a user image mark indicates the horizontal direction the camera was pointing when the image was shot.

  • Page 102: Map Mode Operation

    MAP Mode Operation Press [ý] (MAP) to enter the MAP mode. • Each press of [ý] (MAP) toggles between the User Image mode and the Photogenic Spot mode. Use the procedures below to move a user image mark or a photogenic spot mark near the center of the display’s radar screen lines.
  • Page 103 Press [SET]. This will display a full-screen view of the image (user image or photogenic spot image) where the image cursor was located in the image list. • While a full-screen image is displayed, you can use [4] (scrolls to the image that was above the current image in the image list) and [6] (scrolls to the image that was below the current image in the image list) to scroll to another image.

  • Page 104: Basic Map Mode Settings

    IMPORTANT! • If a section of the zoom bar is gray while a map is displayed, it indicates that the camera does not have further detailed map data for the gray section. In this case, if you slide the zoom controller towards z (Telephoto) and the zoom pointer reaches a gray section, the pointer will stop and the map will not zoom in...

  • Page 105: Using Other Map Data

    Using Other Map Data (MAP Tab Menu) This section explains the menu items that are used when performing operations and configuring settings in the MAP mode. For information about menu operations, see page 58. Saving Position Information (Save Log) Procedure [ý] (MAP) * [MENU] * MAP Tab * Save Log You can use this procedure to save position information from different locations and different times.

  • Page 106: Saving All Positioning Log Data In Camera Memory To A Memory Card (Output Log)

    Saving All Positioning Log Data in Camera Memory to a Memory Card (Output Log) Use the procedure below to convert all of the positioning log data currently in camera memory to a KML file (extension: .kml) and save it to a memory card. Turn off the camera and load the memory card to which you want to save the file.

  • Page 107: Converting Location Information Of Images From Another Source For Playback On This Camera

    Taking care not to drop the camera, slowly swing it around in a figure eight for about 10 seconds. Use the wrist of the hand that is holding the camera to move in a way that forms a figure eight. This will correct for the magnetism and adjust direction sensor accuracy.

  • Page 108: Other Settings

    Other Settings (Set Up Tab Menu) For information about menu operations, see page 58. For information about other settings, see page 140. Auto Image Orientation Detection and Rotation (Auto Rotate) Procedure [MENU] * Set Up Tab * Auto Rotate Automatically rotates snapshots shot with the camera held vertically 90 degrees.

  • Page 109: Displaying Images With Location Information

    Displaying Images with Location Information (PLAY Mode) As with normal images (without location information), use the PLAY mode to display images with location information. Viewing an Image with Location Information See page 30 for the procedure for viewing images. • While an image with location information is on the display, pressing [8] (DISP) will display the location information (latitude and longitude) that was recorded with the image.

  • Page 110: Precautions When Using The Hybrid-Gps

    Precautions when Using the Hybrid-GPS . Using the camera in another country • Certain countries or areas may place restrictions on the use of GPS and/or the accumulation of positioning log data. This camera has a built-in GPS function. Before taking it to another country, be sure to check with the appropriate embassy or with your travel agent to find out if bringing in a camera with a GPS function and/ or accumulation of position information log data is allowed in that country.

  • Page 111: Dynamic Photo

    Dynamic Photo This camera comes with a number of subjects in built-in memory (“built-in subjects”), which you can insert into snapshots and movies to create Dynamic Photo images. • The term “built-in subjects” refers to the moving figures and characters that came pre-programmed in the camera’s built-in memory.
  • Page 112 If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie. Use [4] and [6] to shift the location to the position you want. After you are finished, press [SET].

  • Page 113: To View A Dynamic Photo

    To view a Dynamic Photo (Dynamic Photo File) Press [p] (PLAY) and then use [4] and [6] to display the Dynamic Photo you want to view. If you want to see the subject in the Dynamic Photo move, press [SET]. The Dynamic Photo is repeated as a continuous loop.

  • Page 114: Printing

    Printing Printing Snapshots Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card.

  • Page 115: Connecting Directly To A Pictbridge Compatible Printer

    Connecting Directly to a PictBridge Compatible Printer You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer Turn on the camera and press [MENU]. On the “Set Up”...
  • Page 116 . To print Turn on the printer and load paper. Turn on the camera. This will display the print menu screen. Use [8] and [2] to select “Paper Size”, and then press [6]. Use [8] and [2] to select a paper size and then press [SET].

  • Page 117: Using Dpof To Specify Images To Be Printed And The Number Of Copies

    Using DPOF to Specify Images to be Printed and the Number of Copies . Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service.
  • Page 118 . Configuring the Same DPOF Settings for All the Images Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * All images Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. •...

  • Page 119: Date Stamping

    . Date Stamping You can use one of the following three methods to include the recording date in the printout of an image. Configuring camera settings Configure DPOF settings (page 117). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some don’t.

  • Page 120: Using The Camera With A Computer

    Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there Transfer images stored on your computer to camera memory Play back and...

  • Page 121: Using The Camera With A Windows Computer

    View the User’s Vista, Windows XP Guide (SP2/SP3), Windows 2000 (SP4) YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of Windows OS. Install this software: Installation not required. Installation not required. • Windows Media Player...

  • Page 122: Viewing And Storing Images On A Computer

    . Computer System Requirements for Bundled Software Computer system requirements are different for each of the applications. See the “Read me” file that comes with each application for details. Information about computer system requirements also can be found under “Computer System Requirements for Bundled Software (Bundled CD-ROM)”...
  • Page 123 Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer. • The camera does not draw power over the USB cable. Make sure the camera’s battery is sufficiently charged before connecting.
  • Page 124 Right-click the “DCIM” folder. On the shortcut menu that appears, click “Copy”. Windows 7, Windows Vista users: Click “Start” and then “Documents”. Windows XP users: Click “Start” and then “My Documents”. Windows 2000 users: Doubleclick “My Documents” to open it. •...

  • Page 125: Playing Movies

    Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 138. • An image that was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation. Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card.

  • Page 126: Uploading Movie Files To Youtube

    Uploading Movie Files to YouTube Installing YouTube Uploader for CASIO from the CD-ROM that comes with your camera simplifies uploading of movie files you recorded with the “For YouTube” BEST SHOT scene to YouTube.
  • Page 127 . To upload a movie file to YouTube • Before you can use YouTube Uploader for CASIO, you need to go to the YouTube website (http://www.youtube.com/) and register as a user there. • Do not upload any video that is copyrighted (including neighboring copyrights) unless you yourself own the copyright or you have obtained the permission of the applicable copyright holder(s).

  • Page 128: Transferring Images From Your Computer To Camera Memory

    . To transfer images to the camera Connect the camera to your computer (page 122). On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport. Drag the file(s) you want to transfer to the [Transfer] button.
  • Page 129 . To transfer computer screen captures to the camera Connect the camera to your computer (page 122). On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport. Display the screen whose screen capture you want to transfer.

  • Page 130: Viewing An Image's Recording Location

    On the menu screen, click the “Language” down arrow button and then select the language you want. Click “Manual” to select it and then click “Digital Camera”. IMPORTANT! • You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file.

  • Page 131: Using The Camera With A Macintosh

    Using the Camera with a Macintosh Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do. Operating When you want to System do this: Version Save images to your OS 9 Macintosh and view OS X...
  • Page 132 . To connect the camera to your computer and save files Turn on the camera and press [MENU]. On the “Set Up” tab, select “USB” and then press [6]. Use [8] and [2] to select “Mass Storage”, and then press [SET]. Turn off the camera and then use the USB cable that comes with...

  • Page 133: To View Copied Images

    Double-click the camera’s drive icon. Drag the “DCIM” folder to the folder to which you want to copy it. After the copy operation is complete, drag the drive icon to Trash. On the camera, press [ON/OFF] (Power) to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer.

  • Page 134: Transferring Images Automatically And Managing Them On Your Macintosh

    Transferring Images Automatically and Managing Them on Your Macintosh If you are running Mac OS X, you can manage snapshots using iPhoto, which comes bundled with some Macintosh products. If you are running Mac OS 9, you will need to use commercially available software.

  • Page 135: Viewing User Documentation

    Open the file named “camera_xx.pdf”. • “xx” is the language code (Example: camera_e.pdf is for English.). User Registration Internet registration only is supported. Visit the following CASIO website to register: http://world.casio.com/qv/register/ Using an Eye-Fi Wireless SD Memory Card to Transfer Images...
  • Page 136 IMPORTANT! • Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 140) when on an aircraft or in any other location where use of wireless communication is limited or prohibited. •...

  • Page 137: Files And Folders

    Files and Folders The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. •...

  • Page 138: Memory Card Data

    File System (DCF). . About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. • Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them. • Printing this camera’s DCF-compliant images on another manufacturer’s printer.

  • Page 139: Supported Image Files

    . Supported Image Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen.

  • Page 140: Other Settings (Set Up)

    Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in the REC mode, PLAY mode, and MAP mode. For information about menu operations, see page 58. Adjusting Monitor Screen Brightness (Screen) Procedure [MENU] * Set Up Tab * Screen You can change the brightness of the monitor screen.

  • Page 141: Enabling The Gps Function

    Enabling the GPS Function (GPS) Procedure [MENU] * Set Up Tab * GPS See page 92 for details. Recording Location Information with Image Data (Record Lat/Long) Procedure [MENU] * Set Up Tab * Record Lat/Long See page 93 for details. Auto Image Orientation Detection and Rotation (Auto Rotate) Procedure [MENU] * Set Up Tab * Auto Rotate...

  • Page 142: Configuring Camera Sound Settings

    Configuring Camera Sound Settings (Sounds) Procedure [MENU] * Set Up Tab * Sounds Startup Specifies the startup sound. Half Shutter Sound 1 - 5: Built-in sounds (1 through 5) Shutter Off: Sound off Operation Specifies the sound volume. This setting is also used as the Operation audio level during video output (page 76).

  • Page 143: Specifying The File Name Serial Number Generation Rule

    Specifying the File Name Serial Number Generation Rule (File No.) Procedure [MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 137). Tells the camera to remember the last used file number.

  • Page 144: Configuring World Time Settings

    Configuring World Time Settings (World Time) Procedure [MENU] * Set Up Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe.

  • Page 145: Time Stamping Snapshots

    Time Stamping Snapshots (Timestamp) Procedure [MENU] * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a snapshot, it cannot be edited or deleted.

  • Page 146: Setting The Camera's Clock

    Setting the Camera’s Clock (Adjust) Procedure [MENU] * Set Up Tab * Adjust [8] [2] Change the setting at the cursor location [4] [6] Move the cursor between settings [BS] Toggles between 12-hour and 24-hour format When the date and time settings are what you want, press [SET] to apply them. •...

  • Page 147: Specifying The Display Language

    Specifying the Display Language (Language) Procedure [MENU] * Set Up Tab * Language . Specify the display language you want. Select the tab on the right. Select “Language”. Select the language you want. • Camera models sold in certain geographic areas may not support display language selection.

  • Page 148: Configuring Auto Power Settings

    Configuring Auto Power Settings (Auto Power Off) Procedure [MENU] * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time. Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) •...

  • Page 149: Disabling File Deletion

    Disabling File Deletion ( Ü Disabled) Procedure [MENU] * Set Up Tab * Ü Disabled The camera will not start the image delete operation when you press [2] ( “Ü Disabled” is turned on. You can protect against accidental deletion of images by selecting “On” for “Ü...

  • Page 150: Selecting The Screen Aspect Ratio And

    Selecting the Screen Aspect Ratio and Video Output System (Video Out) Procedure [MENU] * Set Up Tab * Video Out You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9. NTSC Video system used in Japan, the U.S., and other countries Video system used in Europe and other areas...

  • Page 151: Formatting Built-In Memory Or A Memory Card

    Formatting Built-in Memory or a Memory Card (Format) Procedure [MENU] * Set Up Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. •...

  • Page 152: Configuring Monitor Screen Settings

    Configuring Monitor Screen Settings You can turn display information on and off by pressing [8] (DISP). You can configure separate settings for the REC mode and PLAY mode. Information display on Information display + Histogram on Information display off Using the On-screen Histogram to Check Exposure Displays a histogram on the monitor screen which you can use to check the exposure of an image before you shoot it.

  • Page 153: How To Use The Histogram

    How to Use the Histogram A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indicates the number of pixels, while the horizontal axis indicates lightness. If the histogram appears too lopsided for some reason, you can use EV shift to move it left or right in order to achieve better balance.

  • Page 154: Appendix

    Appendix Precautions during Use . Avoid Use While In Motion • Never use the camera to record or play back images while operating an automobile or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident. .
  • Page 155 • Never try to take the camera apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your dealer or nearest CASIO authorized service center.
  • Page 156 • The battery is intended for use with a CASIO Digital Camera only. Use with any other device creates the risk of the battery damage, or deterioration of battery performance and service life.

  • Page 157: Battery Life

    • If battery charging does not end normally within the specified charging time, stop charging anyway and contact your local CASIO authorized service center. Continued charging creates the risk of battery overheating, fire, and explosion.

  • Page 158: Data Error Precautions

    . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory. – Removing the battery or memory card while the camera is performing some operation –...

  • Page 159: Caring For Your Camera

    Doing so creates the risk of fire, malfunction, and electric shock. 0 Should the power cord ever become damaged (to the point that internal wires are exposed or cut), immediately contact your original retailer or a CASIO authorized service center to request repair. Continued use of a damaged power cord creates the risk of fire, malfunction, and electric shock.
  • Page 160 Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of this product in any way that infringes on the copyrights of others or that violates copyright laws.

  • Page 161: Power Supply

    If problems continue to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center. To replace the battery Open the battery cover and remove the current battery.

  • Page 162: Battery Precautions

    Battery Precautions . Precautions during Use • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to the characteristics of the battery, not the camera. • Charge the battery in an area where the temperature is within the range of 5°C to 35°C (41°F to 95°F).

  • Page 163: Using A Memory Card

    Using a Memory Card See page 22 for information about supported memory cards and how to load a memory card. To replace the memory card Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one.
  • Page 164 . Memory Card Handling Precautions Certain types of memory cards can slow down processing speeds. In particular, you may experience problems saving high-quality (HD and STD) movies. When using the camera’s built-in memory or certain types of memory cards, it can take too much time to record data, which can result in breaks in the image and/or audio.

  • Page 165: Computer System Requirements For Bundled Software

    Actual requirements are greater, depending on the number of images and the sizes of the images being handled. 0 Windows YouTube Uploader for CASIO Operating System : Windows 7, Windows Vista, Windows XP (SP2/SP3), Windows 2000 (SP4) • Sufficient memory to run the operating system •...
  • Page 166 Hard Disk Drive Space : At least 335MB Other : Internet Explorer 6.0 or higher installed For details about the minimum system requirements for each software application, see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes bundled with the camera. Appendix...

  • Page 167: Reset Initial Default Settings

    Reset Initial Default Settings The tables in this section show the initial default settings that are configured for menu items (displayed when you press [MENU]) after you reset the camera (page 151). Menu items depend on whether the camera is in the REC mode or PLAY mode. •...
  • Page 168 “Quality” Tab Single SR Quality Single SR Zoom Size 14M (4320 Quality Normal (Snapshots) Quality » (Movies) Effect EV Shift “Set Up” Tab Screen Auto Eye-Fi Record Lat/ Long Auto Rotate Startup: Sound 1 / Half Shutter: Sound 1 / Shutter: Sound 1 / Sounds Operation: Sound 1 /...

  • Page 169: Play Mode

    . PLAY Mode “PLAY” Tab Images: All images / Time: 30 min / Slideshow Interval: 3 sec / Effect: Pattern 1 Dynamic Photo – Movie – Converter MOTION PRINT Create Movie Editing – Lighting – White Balance – “Set Up” Tab •...

  • Page 170: When Things Don't Go Right

    2)The battery may be dead. Charge the battery (page 17). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-90 rechargeable lithium ion battery. The camera 1)Auto Power Off may have activated (page 148).
  • Page 171 (page 37) or select a different BEST SHOT scene (page 52). The ? (Flash Off) The flash unit may be malfunctioning. Contact a CASIO icon flashes red on authorized service center or your original retailer. Note that...
  • Page 172 Problem Possible Cause and Recommended Action A recorded image 1)Camera power may have been turned off before the save was not saved. operation was complete, which will result in the image not being saved. If the battery indicator shows battery as soon as possible (page 19). 2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved.
  • Page 173 Images are not This camera cannot display non-DCF images recorded onto a displayed. memory card using another digital camera. Images cannot be Note that you cannot edit the following types of snapshots. edited (with • Snapshots created using MOTION PRINT resizing, trimming, •...
  • Page 174 Problem Possible Cause and Recommended Action Positioning takes a 1)The first positioning operation you perform with the camera long time. after you purchase it, immediately after changing the “GPS” setting from “Off” to “On”, or after not using it for a long time may take a number of minutes to complete.
  • Page 175 If the language selection screen does not re-appear when you turn the camera on, it means that the camera’s memory management data has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center. Appendix...

  • Page 176: Display Messages

    24 hours, it could mean that the camera’s setting camera’s battery. memory is defective. Contact your retailer or a CASIO authorized service center. Buttons are not With large capacity memory cards there is a delay after the...
  • Page 177 If the same LENS ERROR message appears after you turn power back on, contact a CASIO authorized service center or your original retailer. The Camera Shake unit may be malfunctioning. If the same LENS ERROR 2 message appears after you turn power back on, contact your retailer or a CASIO authorized service center.
  • Page 178 There is no image The setup you are trying to save is for an image that cannot to register. be saved as a user BEST SHOT scene. This card is not The memory card loaded in the camera is not formatted. formatted.

  • Page 179: Number Of Snapshots/Movie Recording Time

    Number of Snapshots/Movie Recording Time Snapshot Image Size Image Quality (Pixels) Fine (4320 3240) Normal Fine (4320 2880) Normal 16:9 Fine (4320 2432) Normal Fine (3648 2736) Normal Fine (2816 2112) Normal Fine (2048 1536) Normal Fine (640 480) Normal Built-in Memory Approximate (Approx.
  • Page 180 Movies Image Maximum Approximate Data Quality File Size Rate (Frame Rate) (Pixels) 1280 Maximum (30 frames/second) Movie Size: 4 GB (30 frames/second) Built-in memory capacity after formatting The above values are based on use of a PRO HIGH SPEED SD memory card (Panasonic Corporation).

  • Page 181: Specifications

    Specifications File Format Snapshots: Movies: Recording Media Built-in Memory (Image Storage Area: 14.5MB*) SD/SDHC/SDXC * Built-in memory capacity after formatting Recorded Image Sizes Snapshot: Movies: Image Deletion 1 file; selected files; all files (with memory protection feature) Effective Pixels 14.10 Megapixels Imaging Element Size: 1/2.3-inch square pixel CCD Total Pixels: 14.48 Megapixels...
  • Page 182 Shutter CCD shutter, mechanical shutter Shutter Speed Snapshot (Auto): 1/2 to 1/2000 second Snapshot (Night Scene): 4 to 1/2000 second * May differ due to the camera setup. Aperture Value F3.2 (W) to F7.5 (W) (When used with ND filter) * Using optical zoom changes the aperture value.
  • Page 183 Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life. Number of Shots (CIPA) (Operating Time)* Continuous Playback (Snapshots)* Approximate continuous movie recording time* •...
  • Page 184 . Rechargeable lithium ion battery (NP-90) Rated Voltage Rated Capacitance Operating Temperature Requirement Dimensions Weight . Charger unit (BC-90L) Input Power Output Power Operating Temperature Requirement Supported Battery Type Charging Time Dimensions Weight • Power cord precautions for use in Singapore The power cord set is not supplied.
  • Page 185 CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA1102-C...
  • Page 186 Getting the Most Out of Dynamic Photo For a wealth of information about Dynamic Photo including explanations about how to use Dynamic Photo images, the Dynamic Studio image conversion service, sample images, and more, visit the special Dynamic Photo website at: This manual provides an introduction to Dynamic Photo, which creates a whole new way to enjoy digital imaging.

  • Page 187: Dynamic Photo! A Totally New Way To Enjoy Digital Photography

    Dynamic Photo! A totally new way to enjoy digital photography! Dynamic Photo provides an easy way to insert built-in subjects into snapshots and movies for a whole new way to enjoy digital imaging. You can create a Dynamic Photo image by inserting a built-in moving subject into a background image (snapshot or movie).

  • Page 188: Creating A Dynamic Photo Image

    Creating a Dynamic Photo Image Your digital camera comes with a number of subjects in its built-in memory (“built-in subjects”). You can use these built-in subjects to create Dynamic Photo images by inserting them into your original snapshots or movies.
  • Page 189 Use [4] and [6] to select the built-in subject that you want to insert into the image and then press [SET]. * Only built-in subjects that can be inserted into other images will appear at this time. If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie.
  • Page 190 Complete! • Inserting a built-in subject into a snapshot will save a Dynamic Photo that consists of 20 still images of 2M size or smaller. • Inserting a built-in subject into a movie will save the Dynamic Photo as a movie file. Important! •...

  • Page 191: Step 3: Have Fun With Dynamic Photo

    Step 3: Have fun with Dynamic Photo. You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways. Step 4: Converting a Dynamic Photo Still Image to a Movie A Dynamic Photo with a still image background and a moving subject is stored as a series of 20 still images.

  • Page 192: Step 5: Use Dynamic Studio To Expand Use Of Dynamic Photo Images To Other Applications

    Step 5: Use Dynamic Studio to expand use of Dynamic Photo images to other applications. Using the CASIO EXILIM Dynamic Photo feature to create a Dynamic Photo image with a moving subject produces a CS image that reproduces the movement of the character.

This manual is also suitable for:

Exh20gbk

Table of Contents