Configuring EOS Utility Communication Settings
2
Start the pairing software.
Start the pairing software on the
computer. Normally, it is installed in
the same location as EOS Utility.
After the pairing software starts up, an
icon is displayed on the task bar.
When the camera is detected, a
message is displayed.
3
Double-click the pairing software
icon.
Detected cameras are listed.
Cameras that have already been
connected are not included in the list.
4
Click [Connect].
If multiple cameras are displayed,
identify the camera to connect to by
its MAC address displayed on the
camera's LCD monitor.
The MAC address can also be
checked on the [General sett.]
screen (p.149).
95