Getting Connected; Connecting To The Internet - Alcatel One Touch 903D Smart User Manual

6

Getting connected

To connect to the internet with this phone, you can use GPRS/EDGE/3G
networks or Wi-Fi, whichever is most convenient.
6.1

Connecting to the Internet

6.1.1 GPRS/EDGE/3G
The first time you turn on your phone with SIM card inserted, it will
automatically configure network service: GPRS, EDGE or 3G.
To check the network connection you are using, press Menu key on
Home screen, then touch Settings\Wireless & networks\Mobile
networks\Network operators or Access point names.
To create a new access point
A new GPRS/EDGE/3G network connection can be added to your phone
with the following steps:
Menu key from Home screen.
• Press
Settings\Wireless & networks\Mobile networks\Access
• Touch
point names.
• For dual SIM model, select the SIM name in the screen that opens.
• Then press Menu key again and the touch New APN.
• Enter the required APN information.
Menu key and touch Save.
• When finished, press
................
67
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
• Press Menu key from Home screen.
• Touch Settings\SIM management\Roaming\Data roaming
• Mark/Unmark the SIM card checkbox to activate or deactivate data
roaming.
• When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to section 6.1.2 Wi-Fi).
To limit your data connection to 2G networks only
To save battery and extend battery life, you can set to activate 2G
networks (GPRS or EDGE) only.
• Press Menu key from Home screen.
• Touch Settings\Wireless & networks\Mobile networks\Network
mode.
• Touch 2G only in the dailog that opens.
For single sim model, touch Settings\Wireless & networks\\Mobile networks\
(1)
Data roaming.
68
(1) .